ATMARS Programmable Dust Test Chamber for Enclosure Test
Product Description
ATMARS sand and dust test chambers simulate a comprehensive environment to test the exposure of automotive and electronic components at concentrated levels of dust in order to validate products seal integrity.
Product Features
ATMARS dust testing chamber vertical circulation airflow carries dust and the test dust can be recycled;
The whole ventilation uses imported stainless steel plate, The bottom of the air duct is connected with the conical hopper, the air inlet and outlet of the fan are directly connected with the air duct, and then the top diffuser of the working chamber is connected to the working chamber body in proper position to form an "O" closed vertical blowing dust circulation system, so that air flow can flow smoothly and the maximum dust dispersed evenly;
Using a single high-power low-noise centrifugal fan, according to the test requirements to adjust wind speed by conversion speed regulator
Standards and Methods
GB/T2423.37-2006 Environmental testing for electric and electronic products - Part 2: Test methods - Test L：Dust and sand
GB4208-2008 IP (Ingress Protection) Code
GB/T4942.1-2001 Classfication of Degrees of Protection Provided By Enclosures of Rotating Electrical Machines (IP Code)
GB11564-2008 Retro Reflector for Motor Vehicles
GB7000.1-2002/IEC60589-1999 General Safety Requirements and Tests for Luminaires
GB/T10485-2008 IP (Ingress Protection) Code
| Specifications of Dust Test Chambers |
| Models |
AT-SC-800 |
AT-SC-1000 |
| Interior Dimension (WxHxD) |
800x800x800 mm |
1000x1000x1000 mm |
| Temperature Range |
25℃～40℃ |
| Humidity Range |
20%～98% R.H |
| Sand Table Size |
150μm～850μm |
| Dust Particle Size |
≤32μm made up 33%; 32μm～250μm 67% |
| Dust Composition |
Silica Powder (at least 95% Silicon) |
| Metal Screen Wire Diameter |
50μm |
| Screen Line Space |
75μm |
| Testing Time |
1 Sec - 99 Hrs, Adjustable |
| Dust Concentration |
2～4KG/m³, Measurable and Adjustable |
| Dust Flowing Rate |
18m～29 m/s |
| Interior Material |
SUS304 Stainless Steel |
| Exterior Material |
SUS304 Stainless Steel Powder Coated |
| Controller |
Small Time Programmable Controller |
| Air Blower |
Stainless Steel Centrifugal Blower |
| Vacuum System |
Pressure Guage, Air Filter, Pressure Regulating FRL and Connecting Pipe |
| Remarks: 1. We reserve the right to change specifications without prior notice; 2. Customized sizes and configurations are available. |
| Payment Terms: | L/C, T/T, Western Union and Cash |
| |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
