Model: | E32-TTL-1W |
---|---|
Brand: | Ebyte |
Origin: | Made In China |
Category: | Electronics & Electricity / Telecommunication & Broadcasting / Wireless Equipment |
Label: | rf transceiver modul , rf module , lora module |
Price: |
US $18
/ pc
|
Min. Order: | 10 pc |
Live Chat: | Last Online:06 Dec, 2016 |
No. |
Parameter item |
Parameter details & description |
1 |
Size |
24 * 43mm(without antenna and SMA) |
2 |
Frequency Band |
410 - 441MHz, default: 433.0MHz, channel:32, 1MHz stepped frequency,Recommending frequency: 433±5MHz, |
3 |
Connector |
1*7*2.54mm,plug-in |
4 |
Supply voltage |
2.8 - 5.5V DC (Note: the voltage higher than 5.5V is forbidden.) |
5 |
Communication level |
UART, USART |
6 |
Operation Range |
About 7500m(test condition:clear and open area& maximum power,antenna gain: 5dBi,height:> 2m,air date rate: 2.4Kbps) |
7 |
Transmitting power |
Maximum 30dBm(1W)| four optional level(0-3),step by 3dBm |
8 |
Air data rate |
Default 2.4kbps, can be configured to 0.3,1.2,2.4,4.8,9.6,19.2Kbps |
9 |
Standby current |
2.0uA(mode 3,M1=1,M0=1) |
10 |
Transmitting current |
670mA at 30dBm |
11 |
Receiving current |
14.5mA(mode 0 or mode 1) | minimum 30uA(mode 2 + 2s wake-up time) |
12 |
Communication interface |
UART, 8N1,8E1,8O1, eight kinds of UART baud Rate, from 1200 to 115200 bps |
13 |
Driving mode |
UART can be configured to push-pull/high pull, open-drain |
14 |
Transmitting length |
512 bytes buffer,58 bytes per package |
15 |
Receiving length |
512 bytes buffer,58 bytes per package |
16 |
Address |
65536 configurable addresses(easy for network, broadcast and fixed transmission) |
17 |
RSSI support |
built-in intelligent processing |
18 |
Sensitivity |
-130dbm at 0.3Kbps( sensitivity has nothing to do with serial baud rate and timing) |
19 |
Antenna type |
SMA-K(External thread hole, 50 ohm impedance) |
20 |
Operating temperature |
-40 ~ +85℃ |
21 |
Operating temperature |
10% ~ 90% |
22 |
Storage temperature |
-40 ~ +125℃ |