Home > Products > Chemicals > Adhesives & Sealants

Model: HKW3367 glue adhesion agent

Summary: specifically for mobile phone industry HKW3367 adhesives film antenna (FPC) antenna from research and development of composite case become warped on the plastic casing

Adhesive, with fast curing, stick relay is strong, not white, easy to operate, the advantages of good environmental performance.

Adhesive is suitable for surface: PC, ABS, PET/PBT, etc. Most of the plastic material.

Specifically for mobile phone industry overview: HKW3367 adhesives membrane antenna (FPC) antenna easy case become warped and development from the plastic casing, compound adhesives has quickly solidified, stick relay is strong, not white, easy to operate, the advantages of good environmental performance.

Adhesive is suitable for surface: PC, ABS, PET/PBT, etc. Most of the plastic material.

Used to guide the

1, the bonding surface preparation

, with a cloth dipped in alcohol clean surface bonding of fibers.

2, operation

With cotton or brush, shower, will HKW3367 evenly on the surface.

For rough surface, sometimes need to daub HKW3367 for many times, usually after 2-3 minutes, after first daub is completely dry, apply for the second time.

The edge part of the mobile phone shell, where big radian to apply in place, appropriate.

3, the drying time

Drying time general depending on the temperature, humidity, coating thickness, high temperature, the humidity is low, low coating thickness is advantageous to the treatment and dry.

Normal drying time: 2-3 minutes, must pay attention to during the coating surface is not contaminated.

4, adhesive FPC antenna

· HKW3367 completely dry (depending on the substrate surface is dry, will be subject to visual shell surface is dry), then on the back glue of FPC antenna has been dry coating surface, and to a certain pressure.

5, excess HKW3367 had not been dried, and can be cleaned with alcohol.