Home > Products > Electronics & Electricity > Electronic Instrument > Analysis Instrument

Product description: This tester is used to test the finished shoes, rubber, plastics; shoe soles, synthetic leather and other material in a cryogenic environment, from the testing can realize the situation of material in cold weather or cold regions. The machine is made of stainless steel, and can install various fixtures to suit different requirements, such as finished shoe, rubber tester, plastic tester and other industry.
Technical date:
(1). the frame material：stainless steel#304
(2). Controller: Japan Omron controllers
(3). Temperature range: a. room temerature~-30℃
b. room temerature~-60℃
(4). Optional inner box action:
A. shoes upper materials low temperature flexing fixtures:
1. The number of groups: 6 sets
2. Test Frequency: 1.5 ± 0.1HZ
3. Fixture V-angle: 40 ° ± 1 °
4. Fixture V-top arc radius of curvature: 6.4mm
5. the most distance of two fixtures: 28.5 ± 1.0mm
6. The nearest distance of two fixtures: 9.5 ± 1.5mm
B. shoes upper materials low temperature flexing fixtures:
1. The number of groups: 4 sets
2. Test Frequency: 100 ± 5 beats / min
3. Flexing angle: 22.5 ° ± 0.5 °
(5). Protection device: Thermal shutdown protection, leakage protection and over-temperature shutdown protection, overload protection and other functions
(6). Control accuracy: ± 0.5 ℃
(7). Distribution uniformity: ± 2 ℃
(8). Cooling rate: a. Room temperature to -30 ℃ needs about 45min.
b. Room temperature to -60 ℃ about 60min
(9). Refrigerant: R404 environmentally friendly refrigerant
(10). Compressor: France Taikang
(11). Compressor start delay: 5min
(12). Power consumption: 4KW
(13). thermal insulation material: hardness foam and glass wool
(14). Counter: LCD, 0 ~ 999,999 adjustable
(15). Windows: (210 × 35 × 270) mm, two grid vacuum layer
(16). Window Light: P1 lights, 5W
(17). Power: AC380V50Hz
(18). motor: No belt with gear reducer motor
(19). inner dimension: （60×60×55）cm
(20). Dimension: （110×105×160）cm
(21). Weight: about 420kg
Accessories:
1. One Chinese instrument operating manual
2. One instrument warranty card
3. One International CNAS third party laboratory instrument calibration report
4. Low temperature shoes upper material flexing specimen, one 70 × 65mm LASER laser die cutter.