Home > Products > Electronics & Electricity > Other Electrical & Electronic

Product introduction

Reactive power compensation reactor is installed in the reactive compensation cabinet to limit switching current and operate over voltage, protecting the capacitor in the power factor correction system, absorbing harmonic current in the power grid, improving the voltage waveform in the system, reducing harmonic pollution, increasing the power factor and improving the quality of power network.

Technical parameters

1. Normal line voltage: 230V-690V
2. Compensation power: 6.3-100Kvar
3. Reactance ratio: 5.67%,7%,14%
4. Overload capacity: 1.35 times the load for long time security operation
5. linearity ≥ 0.95Ln
6. Dielectric strength: winding-earth 300VAC/50Hz/60s no arcing or breakdown
7. Insulation resistance: winding-earth, cross-core screw rob - earth 500VDC, insulation resistance value ≥100MΩ
8. Noise level < 65dB (The testing point's horizontal distance from transformer should be 1 metre.)
9, Protection degree: IP00
10. Insulation class: H
11. Product standards: IEC289:1987 Reactors

                             GBI0229-88 Reactor (EQV IEC289:1987)

Application environment and conditions:

1, The altitude is not more than 1000 meters and if more than 1000 meters, derating is required.
2, Running temperature: -5 ℃-40 ℃, relative humidity is less than 90%. 
3, Without harmful gas, inflammable, explosive and conductive dust around.