Home > Products > Electronics & Electricity > Electronic Components > Circuit Board

Battery-Management-System(BMS) -13S-Li-ion- Li-Polymer-BatteryBattery Management System (BMS) 48.1V 13S Li-ion and Li-Polymer BatteryBattery-Management-System(BMS) -13S-Li-ion- Li-Polymer-BatteryBattery-Management-System(BMS) -13S-Li-ion- Li-Polymer-BatteryBattery-Management-System(BMS) -13S-Li-ion- Li-Polymer-Battery
  • Battery-Management-System(BMS) -13S-Li-ion- Li-Polymer-Battery
  • Battery Management System (BMS) 48.1V 13S Li-ion and Li-Polymer Battery
  • Battery-Management-System(BMS) -13S-Li-ion- Li-Polymer-Battery
  • Battery-Management-System(BMS) -13S-Li-ion- Li-Polymer-Battery
  • Battery-Management-System(BMS) -13S-Li-ion- Li-Polymer-Battery

Battery Management System (BMS) 48.1V 13S Li-ion and Li-Polymer Battery

Model:48.1V 13S Packs
Brand:BEST
Origin:Made In China
Category:Electronics & Electricity / Electronic Components / Circuit Board
Label:13S-PCM , Li-ion-Battery-PCM , LFP-BMS
Price: -
Min. Order:1000 pcs
Inquire Now Add to Basket

Member Information

Detail

SUN BEST (HONG KONG) INTERNATIONAL CO., LIMITED

Biz MemberGuang Dong - China
Live Chat:
点击这里给我发消息Last Online:17 May, 2021

Product Description

Features:
Programmable BMS with  SMBUS, UART, RS485, CANBus Communication protocol
1.Integrated with Microchip, designed for Li-ion / Li-Po (3.6V/3.7V) and LiFepO4 (3.2V), configured from 6S till 20S,accurate SOC/SOH by detecting voltage and current, able to detect the voltage of signal cell.
2.4 channels of temperature-measurement with NTC, software and hardware protection on over-high-voltage,over-low-voltage, over-current, over-temperature and short-circuit.
3.Programmable all logical parameters even on delay time of all the protection procedures.
4.Pre-charge function ( to active the cell’s from over-low-voltage)
5.Intelligent cell balancing function management.
6.EEPROM function to save the production processing files, history records of charges.
7.SMBUS, UART, RS485, CANBus protocol.
8.Thru the communication, BMS can send the discharging and charging voltage/current, temp. information to the end-application and take action on protections
9.Support LED display for fuel/gas gauge (with a button switch to display out the information)
10.With multi working modes, such as working mode, energysaving mode, sleeping mole to reduce the current consumption (system can easily be back to normal working mode from sleeping mode or energy-saving mode).

(Note: the pictures or parameters in this data sheet are only for your reference, those possibly could be different from the ones you will order. Due to the upgrading of the Hardware/Firmware/Software,Characteristics subject to change without notice, for more information, please contact our technical engineers by email: tech@sunbesthk.com

 Specifications:
 

Item

Contents

Criteria

(Adjustable from software/hardware)

1

Model

BEST-####

13S

2

Voltage

Charging voltage

54.6V

3

Current

Maximal continuous charging current

80A (adjustable from hardware)

Maximal continuous discharging current

80A (adjustable from hardware)

Current consumption

≤200μA

 

4

Overcharge Protection

Over charge detection voltage

Adjustable from software

Over charge detection delay time

Adjustable from software

Over charge release voltage

Adjustable from software

5

Over Discharge Protection

Over discharge detection voltage

Adjustable from software

Over discharge detection delay time

Adjustable from software

Over discharge release voltage

Adjustable from software

6

Over Current Protection

Over current detection voltage

Adjustable from software

Over current detection current

Adjustable from software and hardware

Detection delay time

Adjustable from software

Release condition

Adjustable from software

7

Short Circuit Protection

Detection condition

Adjustable from software

Detection delay time

Adjustable from software

Release condition

Cut load, automatically recover

8

Balance

On @ ≥50mV±5mV

OFF @ ≤30mV±5mV

Balance voltage for single cell

Adjustable from software

Balance current for single cell

Adjustable from hardware

9

Resistance

Inner resistance

≤20mΩ

10

Temperature

Single cell temperature when discharge (over temp. protection) ≥65℃

Adjustable from software

Single cell temperature when discharge (low temp. protection) <-40℃

Adjustable from software

Single cell temperature when Charge (over temp. protection) ≥50℃

Adjustable from software

Single cell temperature when Charge (low temp. protection) <0℃

Adjustable from software

11

Fuel/Gas gauge

Display with  LEDs

Thru one button to check capacity

 

Self-consumption in different working modes:

·         Normal Operating Mode: 13mA typical, 18mA maximum self-consumption.

·         Sleep Mode: 200μA typical, 300μA maximum self-consumption. 

·         The system automatically back to normal operating mode from sleeping mode if current is <2A after no communication signal for 60mins.

·         The system also will be back from sleep mode to normal operating mode if any charge or discharge activity is detected or if there’s communication signal again

Voltage protection

·         As soon as one cell’s voltage exceeds the protection point, the charging process will be interrupted on the whole pack. The protection circuit returns to normal conditions as soon as all the cell’s voltage falls back to normal. Thedischarge will be allowed and the cell balancing will be activated.

         As soon as one cell’s voltage is under the protection point, the discharging process will be interrupted on the whole pack, BMS will be in energy-saving mode, The protection circuit returns to normal operation mode as soon as all the cell’s voltage charged back to normal. When BMS protected up on discharging, the charging processing is still allowed.

Current protection

Software:As soon as the discharging current exceeds the over current detection current during the detection delay time, the discharging process will be interrupted. The BMS returns to normal conditions after over current detection current released.

Hardware:As soon as the discharging current exceeds the over current detection current during the detection delay time, the discharging process will be interrupted. The BMS returns to normal conditions after over current detection current released.

ESD:Battery is protected against electrical discharges:

- 15kV air

- 8kV contact

 

 


Price Terms:FOB SHENZHEN
Payment Terms:TT/PAYPAL/WEST UNION/ESCROW
Packing:EXPORT CARTON BOX
Lead Time:7 BUSINESS DAYS AFTER RECEIVE YOUR PAYMENT

Product Image

Battery-Management-System(BMS) -13S-Li-ion- Li-Polymer-Battery
Img 1
Battery Management System (BMS) 48.1V 13S Li-ion and Li-Polymer Battery
Img 2
Battery-Management-System(BMS) -13S-Li-ion- Li-Polymer-Battery
Img 3
Battery-Management-System(BMS) -13S-Li-ion- Li-Polymer-Battery
Img 4
Battery-Management-System(BMS) -13S-Li-ion- Li-Polymer-Battery
Img 5

Send Inquiry to this Member

SUN BEST (HONG KONG) INTERNATIONAL CO., LIMITED

UNIT 5, 27/F., RICHMOND COMM. BLDG., 109 ARGYLE STREET, MONGKOK, KOWLOON, HONGKONG

Phone:
+852-6876 5661
Fax:
86
Contact:
Apple (Director)
Mobile:
136 9168 8815

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Circuit Board Made In China Products

,  

Circuit Board China Suppliers and China Manufacturers