Home > Products > Transportation > Car Accessories > Auto Repair Tools

1.Specification:

2. Feature:

1. tiltable rectangular tube platform allows easy drive on and off of any vehicle;
2. AUTENF clamps anchor most vehicles rock-solid;
3. combination of overhead puller and common puller enlarges pulling power and repair scope;
4. dead car dolly and wheel stand helps to load vehicles with damaged wheels onto platform easily;
5. air pump and electric pump is optional at your choice;
6. hydraulic system has large pulling capacity, long lifespan and low malfunction;
7. with high strength pulling accessories, it can recover any car distortion;

3. Operation Note:

Before operation:
No dust or water in air supply of the pneumatic pump (water separator is recommended). 0.8Mpa pneumatic pump is recommended; 
Keep connector of pneumatic line clean. A connector with dust is forbidden to be connected to the pump; 
Handle the pneumatic pumps with care, no inversion, sidelong or dragging; 

During operation:
Do fix the pulling tower(s) before inclining the platform AND pulling work;
Do fix back-end of the pulling chain on pulling tower before pulling work; 
Do not distort the chain during pulling work; 
During pulling work, no standing along the force direction; 
During pulling work, it is forbidden to beat on the pulling chain or pulling tools; 
Pay attention to pulling tools during pulling work, in case that excessive pulling damages the tools; 
During pulling work, confirm that all quick connector is tight, and do not loosen the connector during operation;
Working height (tower collar) should not exceed the warning line on pulling tower; 
Overhead puller pulls the thin plate or car roof only;

After operation:
Clean the working area, and keep all tools properly and in order;

4.FAQ:

1. Can you make the machine size and color as our request?
Yes, we can make the machine size and color according to your request.
2. What’s the Min order to your company?
1 set.
3. OEM is available?
Yes, we can put your logo on the machine if needed.And we can make the machine structure as your design request.
4. What kind of measuring system do you have?
We have the two dimension measuring,three dimension measuring and electric measusing system for your choice.
5.What’s the advantage of your company?
We have many years experience.We have specialized team work for you, you will get our feedback within 24 hours.
6.Can you match the requirement that the customer?
Yes, we have the factory and designer.
7.What material do you have?Lifting type?
I-beam,rectangular tube and manganese steel 
Single tilting type and Vertical lifting type
8.Could you provide the instruction for customer?
Yes,of course.
 

5. Contact information:

Any question, please feel free to contact us at any time.

(1) Contact person: Lisa Qi

(2) Telephone number:86-535-6372292

(3) Mobile :86-15166881281

(4) E-mail: autenf05@hotmail.com

(5) Whatsapp:15166881281

(6) Skype:autenf05@hotmail.com