Home > Products > Electronics & Electricity > Electronic Instrument > Meter & Instrument Parts

PTI-816 introduction
PTI-816S (In Circuit Tester) is PTI developed. It‘s a Hi-speed In Circuit Tester. It can measure all components on the circuit board. Eg. : Resistance. Capacitance. Inductance , Diode , BJT, FET, SCR, LED, Opto-Coupler ,Relay, IC and so on . Catch up PCBA Short, Open trace, Missing parts, Wrong Insert, Wrong direction, Function defective of the parts. High test coverage, Stability. It can provide all kinds of test report for customer.

Software Characteristics:

1.Support multiple systems and languages

2.Automatic deb ing and generating program

3.Automatic storage reports and test data statistics

4.Self diagnosis and remote assistance function

5.NG Parts &Test Points& Graphical display

6.Muti-Safty-Rules protect Product& Operator 

• Automation debug and generate program
  Automatically learn and debug the Guarding, Stray capacitance ,Contact resistance, open, short, Pin information, IC diode protection, program, IC Scan test program and TESTJET.

Hardware characteristics

Hardware modular design, AC / DC separation four layers circuit boards, Muti-Safty-Rules protection :photoelectric sensors/ emergency button to ensure operator safety, High-quality raw materials ,For example :poly capacitance(error range : ±1%),A/D,A/D:16Bit, Relay life 200,Million times, large isolation voltage, Small resistance when closed and it's not affected by temperature , IC Scan is exclusive development of technology for test the IC pins of the parallel.

*System specification*

………………………………………………………………………………………………………

Test pin point:                                standard：320 point

Large Mainframe: can expand to 4096 point

………………………………………………………………………………………………………

Test item ：                    maximum：3,000,00setps

………………………………………………………………………………………………………

Test time:                                         open/short circuit test：1000 point ≤1s（Typical DUT）

Component： 0.5ms—30ms （Typical DUT）

………………………………………………………………………………………………………

Test Range:    

R： （CC）  0.01Ω-----------40MΩ       L：（CV/AC）1.0UH------------60H

Resistance:

      （CV）  10Ω--------40MΩ             （Phase）1.0UH-------------60H  

      （Phase）10Ω--------40MΩ              D/DT：   0.1 ---------- -- 9.99V

C： （CV/AC） 0.1PF------300UF         Zener Diode：0.1V------------50.0V

     （CC/DC）  3UF-------100,000UF      Function test: 0.00V-----------99.99V

      (Phase）    1PF----------300UF  

………………………………………………………………………………………………………

Guarding:              Guarding point automatic selection, each test step 5 pionts    

………………………………………………………………………………………………………

PCB size:     SizeA:380mm(W)×310mm(D)×100(H)

                  SizeB:450mm(W)×330mm(D)××100(H)

SizeB:480mm(W)×330mm(D)××1000(H)

Optional：Custom client

………………………………………………………………………………………………………

Computer:             Inter Pentium 4 (Customer can select)

………………………………………………………………………………………………………

Monitor:                Low EMF LCD Monitor

………………………………………………………………………………………………………

Memory:               3.5’1.44MB Floppy disk/80GB HDD

..............................................................................

Software system:  Multilingual interface

………………………………………………………………………………………………………

Printer:           Standard 76 mm needle printer

………………………………………………………………………………………………………

Other devices:   Photoelectric protector

………………………………………………………………………………………………………

Option function:       TESTJET:  QTY 64pcs (Standard Configure)

………………………………………………………………………………………………………

Pneumatic : cylinder bore 100mm,cylinder stroke  200，maximum pressure：470kg/3Bar

cylinder bore 125mm,cylinder stroke  160，maximum pressure：735kg/6Bar

………………………………………………………………………………………………………

Air pressure：  4-6kg/cm²，           Air consumption：4Liter/Cycle

……………………………………………………………………………………………………… Power standard：     AC100V-120V,200V-240V/50Hz-60Hz/350W

………………………………………………………………………………………………………

Size and weight：     1000mm（L）*800mm（W）*1600mm（H），about: 260kg

………………………………………………………………………………………………………

Utilize environment:     Temperature: 0ºC~40ºC  Humidity：20~80%

………………………………………………………………………………………………………

Option Item:

  1.SFIS(Shop-Floor Information System

2,Bar code management and the remote control

3, Double-acting cylinder

4,Good seal system

………………………………………………………………………………………………………