PTI-816S (In-circuit-test) tested all kinds of electronic material assembled in PCBA. These equipments have a stable property/Good quality/Good Cost and performance measure accurately. PTI can service on the remote side in china if happen any trouble, we will train for customer before shipment.
PTI-816S introduction
PTI-816S (In Circuit Tester) is PTI developed. It is a Hi-speed In Circuit Tester. It can measure all components on the circuit board. For example: Resistance , Capacitance , Inductance , Diode , BJT, FET, SCR, LED, Opto-Coupler ,Relay, IC and so on . Catch up PCBA Short, Open Trace, Missing parts, Wrong insert, Wrong direction, Functionaldefective of the parts. Have a high test coverage and Stability. It can provide all kinds of test report for customer.
Introduce:
|
Support multiple systems and languages
·Automation deb ing and generating program
·Automatic storage reports and test data statistics
.Self diagnosis and remote assistance function
.Graphical display of bad components and points
·Muti-Safty protection to ensure operator safety
·Support IC burn and Boundary Scan technology
|
|
Software Characteristics:
Utilized the Windows version of the operating environment, Paging software design of the interface , Powerful file storage, Support multi-user hierarchical management, Real-time display series-parallel of components, Support other kinds ICT test program on the market convert to PTI program.
Automation deb ing and generating program
Automatically learn and debug the Guarding, Stray capacitance ,Contact resistance, open, short, Pinlnformation, IC diode protection, program, IC Scan test program and TESTJET.
|
Graphical display of bad components and points
|
|
Automatic storage reports and test data statistics
|
Hardware characteristics
Hardware modular design, AC / DC separation four layers circuit boards, Muti-safty protection :photoelectric sensors/ emergency button to ensure operator safety, High-quality raw materials ,For example :poly capacitance(error range : ±1%),A/D,A/D:16Bit, Relay life two hundred million times, large isolation voltage, Small resistance when closed and it's not affected by temperature , IC Scan is exclusive development of technology for test the IC pins of the parallel.
| |
| |
|
(RC,RL)
Wide frequency and accurate phase separation
|
|
HP TESTJET Technology
|
Electrolytic capacitor polarity test
|
Three or four points measurement
System specification
.........................................................…
Test pin point: standard:320 point
Large Mainframe(special demmand): can expand to 4096 point
.........................................................…
Test item : maximum:300000setps
............................................................
Test time: open/short circuit test:1000 point ≤1s(Typic)
component: 0.5ms-30ms (Typical DUT)
.........................................................…
Test Range:
Resistance:
R: (CV Mode) 10Ω-40MΩ L: (Phase)1.0UH-60H
R: (Phase) 10Ω-40MΩ D/T:0.1-9.99V
C:(CV/AC) 0.1PF-300UF Zener Diode:0.1V-50.0V
C:(CC/DC) 3UF-100000UF Function test:0.00V-99.99V
C:(Phase) 1PF-300UF
.........................................................…
Guarding: Guarding point automatic selection, Each Test Step can add 5 pionts
.........................................................…
Size A:380mm(W)×310mm(D)×100(H)
PCB size: SizeB:450mm(W)×330mm(D)××100(H)
SizeB:480mm(W)×330mm(D)××1000(H)
Optional:Custom client
.........................................................…
CPU: Pentium 4, Intel
PC:Inter Pentium 4 and better
.........................................................…
Monitor: Low radiation LCD monitor
.........................................................…
Memory: 3.5'1.44MB Floppy disk/80GB HDD
..............................................................................
Software system: Multilingual interface
.........................................................…
Printer: Standard 76 mm needle printer
.........................................................…
Other devices: Photoelectric protector
.........................................................…
Option Function: TESTJET: To test the IC number 64 (standard)
.........................................................…
Pneumatic : cylinder bore 100mm,cylinder stroke 200,maximum pressure:470kg/3Bar
cylinder bore 125mm,cylinder stroke 160,maximum pressure:735kg/6Bar
.........................................................…
(Air pressure): 4-6kg/cm²,(Air consumption):4Liter/Cycle
