| Model: | 1.2714/L6 |
|---|---|
| Brand: | DIN 1.2714 / AISI L6 Tool Steel |
| Origin: | Made In China |
| Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Bars, Rods, Angles, and Stainless Steel Shapes |
| Label: | 1.2787 tool steel , 1.2787 mold steel , 1.2787 square bars |
| Price: |
-
|
| Min. Order: | - |
| Live Chat: | Last Online:05 Jul, 2016 |
1.2714 Tool Steel
|
Standards |
DIN |
AISI |
JIS |
ГОСТ |
|
X55NiCrMoV7 |
1.2714 |
L6 |
SKT4 |
5ХН2МФ |
ALTA SPECIAL STEEL supply DIN 1.2714 / AISI L6 in round bar, plate, square, sheet and block.
Nickel-chrome-molybdenum-vanadium steel for hardening in the stream of air or in oil with high hardenability. The steel has high hardness after hardening, good resistance to the tempering, good toughness and good firmness during the heat. Is resists quick temperature changes and also thermal fatigue. The steel is well-workable during the heat and well-workable in the soft-annealed state.
We welcome your inquiries for tool steel, please contact us for quotation sales@altaspecialsteel.com
_________________________________________________________________________________________
Chemical Composition
|
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
Ni |
|
0.50-0.60 |
0.10-0.40 |
0.65-0.95 |
≤0.030 |
≤0.030 |
1.00-1.20 |
0.45-0.55 |
0.07-0.12 |
1.50-1.80 |
Product Range
Round bars : Dia 16mm - 800mm
Flat bars : Thick 50mm - 405mm, width up to 1000mm
_________________________________________________________________________________________
Applications : for tools for mechanical working during the heat such as dies of all sizes, especially with the firmness over Nmm2 for drop hammers and forging presses, extruders with the firmness over 1600 Nmm2 for extrusion of non-ferrous metals. The steel is appropriate for knives during the cold cutting of materials of thick thicknesses, knives for scrap iron. For pressing of plastic substances, big forces and breeze-blocks can be produced from this steel and these can be hardened in air.
_________________________________________________________________________________________
Heat Treatment
|
Way |
Temperature[℃] |
Remark |
|
Forging |
850 - 1050 |
|
|
Soft annealing |
680 - 710 |
Max. 248HB after annealing |
|
Quenching |
840 - 860 |
Cool in oil up to about 100 °C |
|
Tempering |
490 - 510 |
|
|
℃ |
400 |
500 |
600 |
650 |
|
HRC |
51 |
47 |
42 |
36 |
