CCTV Video Ground Loop Isolator with Buit in Filter (GB100HD)
Product Description
BNC CCTV Video Ground Loop Isolator with Buit in Filter(GB100HD)
Features:
1. Compatible with CVI1080P, TVI720P, TVI1080P, AHD720P, AHD1080P. It's not suitable for CVI 720P.
2. BNC male to BNC female with mini cable 18cm on both sides.
3. Passive, no power required.
4. Prevents video-signal distortion caused by video ground loops.
5. Eliminates picture tearing, crosstalk and rolling.
6. Built in TVS (Transient Voltage Suppressors) for surge protection.
7. Built in video filter, perfect to work with DVR to immunity DVR interference, for extra interference rejection.
8. Prevents power cables laid by others interfering with the CCTV system.
Installation View:
The Video Ground Loop Isolator should be installed where runs of video cable are known to have ground loops. It must be installed in the video cable that has come directly from the camera, but before the cable has been connected to anything else.
If several video cameras come from the same area, fix a Video Ground Loop Isolator In every cable, or a ground loop will still remain.
Specification:
| Insertion Loss |
0.5dB |
| Frequency Response |
20HZ~60MHZ, +0/-4dB |
| Input Resistance |
75ohm |
| Output Resistance |
75ohm |
| Isolation Voltage |
600VDC (Min) |
| Insulation Resistance |
100M Ohm |
| Transient Voltage Suppressors |
12 Vrms |
| Dimensions (mm) |
52*26*22 with 18cm x 2 cable |
| Material |
ABS |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
