Home > Products > Electronics & Electricity > Optical Fiber, Cable & Wire > Computer Cable

Singlemode (9/125um) Fiber Optic Cables Patch Cords

1. Sophenol's fiber optic patch cords include differen terminations like LC, SC/APC, ST, E2000/APC, MU, VF45, FC, MTRJ, SC, MPO, MTP, FC/APC, ST/APC, LC/APC, E2000, DIN, D4, SMA, Escon, FDDI, etc. 
2. Fiber optic patch cords are available for simplex, duplex and multicore with single mode 9/125 or multimode 50/125, 62.5/125, etc. 
3. Various kinds of cable materials, PVC, Riser, Plenum, OFNR, OFNP, LSZH (LSOH), 10 Gig Aqua. 
4. There are assemblies for simplex fiber optic patch cords, duplex fiber optic patch cords, multi fiber optic patch cords, and also ribbon fan out fiber optic patch cords and bundle fiber optic patch cords.  
5. Typical fiber optic patch cords cable diameter can be 0.9mm, 2mm,or 3mm. Sophenol also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc. 
6. High Quality and Cost-effective 9/125μm Singlemode Fiber Patch Cable
The 9/125μm single mode fiber patch cable meets RoHS compliant.
7. All cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling. 

Quality Standard:
· Fire retardant conformity with IEC 60332-3C standard
· No corrosive gas emissions IEC 60754-2 standard
· Low smoke zero halogen emissions with IEC 61034-2 standard
· Use international standard LC, SC, ST, FC connectors, support simplex or duplex

Features:  
· 100% pre-terminated and optically tested in factory to ensure transfer performance
· Meets or exceeds industry standards for return loss and insertion loss
· Manufactured using advanced automated assembly and polishing techniques
· Segmented boot for bend strain relief
· Use standard LC, SC, ST, FC connectors, support simplex or duplex
· Customized OEM products available

Custom Assembly:
· LC, SC, ST, FC, MTRJ, and other customize connectors available upon request
· PC, UPC, APC polishings available upon request
· 0.99mm, 1.2mm, 1.6mm, 1.8mm, 2.0mm, and 3.0mm diameters also available upon request
· Yellow, Orange, aquamarine, violet  or customized color jackets and boots available
· Length and fibers according to request, and Pigtail available
· Simplex, duplex, uniboot, zipcord jacket, or armoured cable, etc. all available

How to correctly choose between PVC, LSZH and OFNP? 
PVC Cable: PVC cable resistant to oxidation and degradation, is used for horizontal runs between the table. 
It is also work for vertical runs if the building features a contained ventilation system running through the duct work. 

LSZH Cable: LSZH cable has a special flame-retardant coating, and excellent fire safety characteristics of low smoke, low toxicity and low corrosion. 
It is same to PVC cable for horizontal runs between the table. 

OFNP Cable: OFNP cable is a space within the building created by building components, designed for the movement of environmental air, complies with the NFPA fire safety. 
It is usually work for vertical runs between floors. 

How to Choose The Right Fiber Optic Cable Type? 

PS: The difference of OM4 and OM3 fiber mode as the following

1. OM4 was developed specifically for VSCEL laser transmission and allows 10 Gig / second link distances of up to 550 Meters (compared to 300M with OM3). 
2. The effective modal bandwidth for OM4 is more than double that of OM3. 
3. For OM4 patch cable, it is 4700 MHz. Km while for OM3, it is 2000 MHz. Km. 
4. Custom and OEM