Home > Products > Chemicals > Chemical Auxiliary & Catalyst > Chemical Auxiliary

Aliphatic water reducer has two kinds of powder and liquid state, HSB (High Strence Bing) that aliphatic High efficiency water reducing agent is polymer sulfonated focal aldehyde carbonyl synthesis. Hate water-based main chain aliphatic hydrocarbons, hereinafter referred to as "HSB, is one of the research and development of henan province water reducing agent. This product is the main raw material with NaOH, sulfuric acid, acetone, formaldehyde, etc. Wide applicability of cement, of concrete increases obviously, little slump loss, low temperature without sodium sulfate crystallization phenomenon, is widely used for dispensing pumping agent, retarded, early strength, antifreeze, gas and other kinds of personality is minimised agent, can also with naphthalene series water reducing agent, amino water reducing agent, compound use poly carboxylic acid water reducing agent.

HSB aliphatic water reducer, powder

The main technical indicators

project

indicators

appearance

Red brown or light yellow powder

PH

9-10 (10%) aqueous solution

Effective content (%) or greater

90

Moisture content (%) or less

7

Water insolubles (%) or less

3

Solid content

> 94%

The performance characteristics of

1, high water reducing rate. Dosage of 0.5 1%, water reducing rate can reach 15-25%. Under the condition of same slump, mixed aliphatic high efficiency water reducing agent (powder) can save 25-30% of the cement dosage;

2, early strength, enhance the effect is obvious. Concrete mixed with aliphatic high efficiency water reducing agent (powder), three days can meet the design strength of 60-70%, seven days can reach 100%, 28 days 30-40% higher than that of blank concrete strength;

3, hi-fi. The concrete slump loss is small, basic no loss of 30 min, 90 min loss of 10-20%;

4 and wide applicability of cement, workability, good adhesiveness. And other kinds of admixtures compatibility is good;

5, can significantly improve the freeze resistance of concrete, impermeability, resistance to sulfate attack, and comprehensively improve the other physical properties of concrete;

6, especially for the following concrete: flow plasticizing concrete, natural curing, pipe, concrete impermeability of waterproof concrete, freezing-thawing resisting durability of concrete, the resistance to sulfate erosion Marine engineering concrete, as well as reinforced and prestressed concrete;

7, aliphatic high efficiency water reducing agent (powder), non-toxic, non-flammable, no corrosion of reinforcement, the winter without sodium sulfate crystallization.

Method of use

1, is dissolved the powder in 30-35% of the liquid used. Through experiments the optimal dosage, recommended dosage is 1.5 to 2%;

2, aliphatic high efficiency water reducing agent (powder) to join in the concrete, along with the mixing water can also be taken after addition, adding aliphatic high efficiency water reducing agent (powder) concrete mixing 30 s will be extended;

3, because of the aliphatic high efficiency water reducing agent (powder) water reducing rate is bigger, before the concrete initial setting, secrete a layer on the surface yellow pulp, belongs to the normal phenomenon. After concrete slurry finishing, color will be eliminated, or on the concrete strength, color naturally eliminate, water conservation will be faster to eliminate some color, does not affect the inner and surface properties of concrete.

Storage and packaging

1, aliphatic high efficiency water reducing agent (powder) can be stored under - 20-40 degrees Celsius but cannot insolate, one year warranty.

2. Packing: 25 kg/bag Packing also can according to user's requirements

HSB aliphatic water reducer - liquid

The main technical indicators

1, the appearance of palm red liquid. 2, solid content > 35%; 3, specific gravity 1.15 1.2

The performance characteristics of

1, high water reducing rate. Quantity of 1-2%, water reducing rate can reach 15-25%. Under the condition of equal strength slump, mixing HSB can save 25-30% of the cement dosage;

2, early strength, enhance the effect is obvious. Concrete mixed with HSB, three days can meet the design strength of 60-70%, seven days can reach 100%, 28 days 30-40% higher than that of blank concrete strength;

3, hi-fi. The concrete slump loss is small, basic no loss, 60 min min 90 loss of 10-20%;

4 and wide applicability of cement, workability, good adhesiveness. And other kinds of admixtures compatibility is good;

5, can significantly improve the freeze resistance of concrete, impermeability, resistance to sulfate attack, and comprehensively improve the other physical properties of concrete;

6, especially for the following concrete: flow plasticizing concrete, natural curing, pipe, concrete impermeability of waterproof concrete, freezing-thawing resisting durability of concrete, the resistance to sulfate erosion Marine engineering concrete, as well as reinforced and prestressed concrete;

7, HSB non-toxic, non-combustible, no corrosion of reinforcement, the winter without sodium sulfate crystallization.

Method of use

1, find out the best dosage through the experiment, the recommended dosage is 1.5 to 2%;

2, HSB add to the concrete, along with the mixing water can also be taken after addition, stir in HSB concrete to extend 30 s;

3, because of its high water reducing rate of the HSB, concrete initial setting, secrete a layer on the surface yellow pulp, belongs to the normal phenomenon. After concrete slurry finishing, color will be eliminated, or on the concrete strength, color naturally eliminate, water conservation will be faster to eliminate some color, does not affect the inner and surface properties of concrete.

Storage and packaging

1, the HSB can be stored under - 20-40 degrees Celsius but cannot insolate, one year warranty.

2. Packing: 250 kg drum or bulk supplies, packaging can also be in accordance with the requirements of the users.