stainless steel wire mesh
Product Description
Materials: 304 304L 316 316L
Features: acid-resisting,alkali-resisting,heat-resisting,corrosion-resisting
Applications: Stainless steel wire mesh is widely used in chemical industry, environment protection, mine industry, airspace industry, paper-making, electronic industry, metallurgy industry, food industry, pharmacy etc.
Weaving Pattern: Plain weave and Twill weave
1) Weaving Styles:
Weave style describes the ways the wires cross over and under each other.There are two common weave styles: plain weave and twill weave.
Plain weave: Each wire alternates—first going under one wire,then going over the next wire.Plain weave is the most common weaving style.
Twill weave: Each wire goes over and under two wires in succession.Twill weave is often used when wire diameters are too large to allow a plain weave.
Other types of weave are available by special order.
2) Wire Diameter:
Wire diameter is to measure the thickness of the wires in the wire mesh.Warp and Weft wires may be the same diameter,or cross or line wires may have a different diameter (typical in wire mesh used for filtration). If possible,please specify wire diameter in decimal inches instead of wire gauge.
3) Mesh Counts:
Mesh is the number of openings per lineal inch.Mesh is always measured from the centers of the wires.
When mesh is greater than 1 (that is, the openings are greater than 1 inch),mesh is measured in inches. For example, a two-inch (2") mesh is two inches from center to center. Mesh is not the same as opening size.
PACKING:packed in roll by paper tube,water-proof paper inside then plastic film,wooden case outside fixed by steel belt
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,