Home > Products > Security & Protection > Fire Fighting

conventional 8 zone fire alarm control panel with sound output HS-CK1008 1
  • conventional 8 zone fire alarm control panel with sound output HS-CK1008 1

conventional 8 zone fire alarm control panel with sound output HS-CK1008

Model:HS-CK1008
Brand:Haisheng
Origin:Made In China
Category:Security & Protection / Fire Fighting
Label:fire control panel , 8 loops controller , fire alarm panel
Price: -
Min. Order:10 pc
Inquire Now Add to Basket

Company Information

Detail

Product Description

 Conventional fire alarm control panel Fire Fighting Panel HS-CK1008 with 8 zones.

 

 

General

Conventional Fire Alarm Control Panel with eight Zones

Key Specifications/Special Features

  • Two Style B (Class B) Initiating Device Circuits (IDCs).
  • All zones accept two-wire smoke detectors and any normally-open contact devices.
  • One built-in Fire Fighting Ouput.
  • 24-volt operation.
  • Resettable four-wire smoke detector power @ 500 mA.
  • Non-resettable power @ 500 mA.
  • One-man walk-test programmable for silent or audible test.
  • Disable/Enable control per IDC.
  • Reverse polarity protection.

 

 

Packaging & Shipping

Conventional Fire Alarm Control Panel with four Zones 

1 pc/carton box;carton M:43*17*51cm

Our Services

  OEM & ODM or  Any one of our existing product designs can also be modified to meet your specific requirements. 

FAQ

 

BEFORE INSTALLING

NOTICE: This manual should be left with the owner/user of this equipment.

 

GENERAL DESCRIPTION

 

The conventional manual call point designed for conventional fire alarm system for 

reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches. 

One 470 ohm resistor is used on the PCB board between Zone+ and Zone- when 

the switch inside is closed. So the conventional manual call point is only used with

conventional fire alarm control panel, it is forbidden to be used to other system.

 

OPERATION

The manual call points provide a textured finger-hold area that includes Braille text. 

In addition to PUSH IN and PULL DOWN text, there are arrows indicating how to 

operate the station, provided for non-English-speaking people.

 

Pushing in and then pulling down on the handle activates the normally open alarm switch. 

Once latched in the down position,the word “ACTIVATED” appears at the top in bright yellow,

with a portion of the handle protruding at the bottom as a visible flag.Resetting the station is 

simple: insert the key, twist one quarter-turn, then open the station’s front cover, causing the 

spring-loaded operation handle to return to its original position. The alarm switch can then be

reset to its normal (non-alarm) position manually (by hand) or by closing the station’s front cover,

which automatically resets the switch.

 

Loop Design and Wiring

Conventional Fire Alarm Control Panel with four Zones

The fire alarm control panel Zone wire can be connected to terminal loop (+), loop (-)  unpolarized wire. 

If the manual call point is in the end of the zone wire, a 5.6K resistance should be connected to 

terminal loop (+), loop (-).

 

INSTALLATION

NOTE: All wiring must conform to applicable local codes, ordinances, and regulations.

Mounting Indoor Wall

1. Attach mounting base to wall at 1.5 meter’s high.

2. Connect field wiring to terminals

3. To attach product to mounting base.

4. Secure product by tightening the one mounting screws in the front of the product housing.

 

Why choose us

 

Advantage we have 

A.experienced manufacturers;

B.alibaba golden supplier ,factory recognized by ccc;

C.7/24service for you ,all the question will be dealed within 24hours;

 

D.Benefit you get 

   Stable quality---coming from good material and technic.

   Lower price---not cheapest but the lowest at the same quality.

   Good service --satisfactory service before and after sale.

   Delivery time ----30days for mass production.


Product Image

conventional 8 zone fire alarm control panel with sound output HS-CK1008 1
Img 1

Send Inquiry to this Company

Shenzhen Haisheng Security Technology Co.,Ltd

17I RuiJun Building,No.108 ShaJing Town,Bao'an District, Shenzhen,GuangDong,China

Phone:
86-755-23500163
Fax:
86
Contact:
Wendy Zou (Sales Engineer)
Mobile:
18682294347

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Fire Fighting Made In China Products

,  

Fire Fighting China Suppliers and China Manufacturers