Adopting international advanced “coalescence & separation” technology, JFS series oil purifier is an on-line turbine oil purifier developed by Wanmei company, it can be used as oil filtration equipment for breaking emulsion, dehydration and removing impurities for many kinds of low-viscosity lubricating oil, as well as diesel fuel, gasoline fuel, kerosene, etc.
Application scope:
The machine is mainly used to purify turbine oil and low viscosity lubricating oil with high water content and heavily emulsified. Due to the obvious effect in breaking emulsion and dehydration, it is widely used in the power generation plants and factories. It can work onsite and on line by connecting the machine to the oil container of the equipment , without interference of power supply.
Characteristics:
1. Integrated with precise-filtration and high-efficiency dehydration function, it can break emulsion of oil and water, removing free water from oil. After treatment, free water content is lower than 80PPM. It can remove solid particulates from oil. The purified oil cleanness comply with NAS7 requirement.
2. High-precise filtration effect, large pollutant containing capacity, long-life filtration element, high-efficient dehydration.
3. No heating, pumping or centrifugal process, so as to lower the cost.
4. No effect on oil physical and chemical property so as to extend oil service life.
5. Alarm on filter element malfunction and overload of electrical apparatus.
6. Automatic water drainage and volume measurement.
7. Capable Working onsite and on line.
| Product Type and Main Technical Parameter |
| Type |
JFS-50 |
JFS-100 |
JFS-200 |
JFS-300 |
JFS-500 |
JFS-1000 |
| Overall |
L |
1580 |
1850 |
2300 |
2480 |
2580 |
3180 |
| Dimension |
W |
820 |
1000 |
1280 |
1300 |
1500 |
2030 |
| (mm) |
H |
1100 |
1300 |
1430 |
1650 |
1850 |
2380 |
| Power Supply |
380V 50Hz (can be adjusted) |
| Motor Power |
Main |
1.1 |
2.2 |
7.5 |
15 |
18.5 |
37 |
| (kw) |
Assistant |
0.5 |
0.5 |
2.2 |
2.2 |
3.2 |
3.5 |
| Flow rate (L/min) |
50 |
100 |
200 |
300 |
500 |
1000 |
| Main Technical Data |
| Working Pressure |
<0.5MPa |
| Oil type |
turbine oil, low viscosity hydraulic oil, lubricating oil |
| Cleanness after treatment |
6~8 NAS |
| Remaining Water content |
<80PPm |
| Filtration Precision |
3~5μm |
