Home > Products > Electronics & Electricity > Electronic Components > Terminal

J30J Series Microminiature Plug Electrical Connector

Presentation

*     The product uses the metal shielded shell, equivalent to MDM series products in America.

*     Number of cores: there are ten specifications: 9-core, 15-core, 21-core, 25-core, 31-core, 37-core, 51-core, 66-core, 74-core and 100-core.

*     The male contacts adopt twist pins, with high the contact density and contact spacing of 1.27 mm.

*     The sectional area of the wire core is 0.1-0.15 mm2. In addition, 0.07mm2 wire may be used, but the product model will be special.

*     There is a changed tail suitable for the hole spacing of the PCB.

*     The locking components of this series product are assembled with the products for supply in accordance with the ordering request. If the locking components are not required, it shall be noted in the contract.

*     Executive standard: Q/HLJ2.1.2.11-2009 Detail Specification for J30J Series Microminiature Rectangular Electrical Connector.

Main Technical Properties

【Mechanical properties】

--Vibration: 10-2000Hz, 196 m/s2

--Shock: 735 m/s2  11 ms

--Durability: 500 times

【Environmental properties】

--Ambient temperature: -55℃ to +125℃

--Relative humidity: 92-98% at 40±2℃

--Air leakage rate index (only for sealed product at 0.1MPa difference):

J30JM series: 5×10-2Pa.cm3/s

J30JM1 series: 1.0×10-3Pa.cm3/s

【Electrical properties】

--Contact resistance: ≤10mΩ

--Rated current: 3A

--Insulation resistance: ≥5,000MΩ

--Dielectric withstanding voltage: 800V

Executive standard: Q/HLJ2.1.2.11-2009 Detail Specification for J30J Series Microminiature Rectangular Electrical Connector.