Home > Products > Construction & Decoration > Shaped Building Material

Ding lun deformation seam structure characteristics and types1, the metal plate type:By the aluminum alloy base, aluminum alloy and stainless steel) of center plate, stainless steel pole.Apply seam 50-450 - mm wide.Metal plate type is the feature of seam on both sides of the base plate and fixed in the deformation between the stainless steel pole links, installation time slider according to put 45 Angle, when the base displacement, metal plate always stay in the center of the seam, when used for floors can increase the thickness of the plate, improve the bearing capacity.General type bearing load of 18.4 KN (7.5 t forklift through).The frequency can be in accordance with the requirements of engineering consultation.2, metal card type:Sides of aluminum alloy base, aluminum alloy plate, aluminum alloy center of sliding plate.Applied the seam width 50-450 mm.Center of sliding plate is sandwiched between side plate and aluminium alloy base, neat appearance, convenient installation.3, double row embedded type:Center from aluminum alloy base, aluminum plate, stainless steel pole, and rubber, suitable for sewing 50-450 - mm wide.Double row of flat aluminum alloy plate is hollow, the groove can be embedded in the adornment material such as stone, floor tile, carpet, suitable for high cleanliness requirements of floors.4, single flat:Aluminum alloy base and rubber strip.Apply seam 25-100 - mm wide.After installing rubber strip with adornment layer smooth, tight.5, seismic type:Basically divided into two categories.Exterior walls and roof of seismic deformation joint device of rubber elastomer on special device, apply seam width 50-450 - mm. The floors of the seismic deformation joint device of aluminum alloy base, central flat, slider and aseismic springs, rubber strip.Apply seam 50-450 - mm wide.So when it happens, slider bearing with seismic spring mechanism after deformation, can make the border around the center plate base, in order to protect the both sides of the seam deformation structures from being damaged, when the force disappears, center plate will automatically restore the original state, it can withstand more displacement direction, has the seam formation, adornment effect is good wait for a characteristic.Some single floors of elastic rubber strip deformation joint device is only applicable to sewing 50-100 - m wide.