|Origin:||Made In China|
|Category:||Security & Protection / Alarm|
|Label:||addressable panel , alarm contro panel , master panel|
|Min. Order:||1 pc|
MN 3010 runs up to 50/ 100/ 200/ 324 addresses with single loop, detectors and modules report alarm signal actively, three adjustable sensitivity modes for environmental variations, it is ideal to meet various environment requirements in any area, suitable for small or medium sized commercial and industrial premises. With this robust, enhanced and proved Sanjiang Digital Systems Protocol running for ten years, the control panel MN 3010 epitomize quality, durability and reliability. Further more, MN 3010 can be networked to become part of much larger systems if needed, therefore providing a future proof solution for any installation.
Fully compliant with CCC (the Chinese standard for Fire alarm Systems - Components for detection Systems)/ GB 4717-2005 Fire Alarm Control Unit and GB 16806-2006 Automatic Control System for Fire Protection, the MN 3010 is an entry level intelligent addressable control panel which can be configured for 1 loop operation.
Circuit is equipped by optional addressing points, addresses and device types identified automatically, also designed to reduction of the equipment cost. The simplicity of operation, detailed cause and effect programming capability and competitive pricing make the system suitable for a wide range of small to medium sized projects.
1、4.3”color LCD, resolution 430×272.
2、onfigurable as a 1 loop panel, up to 324 addresses.
3、Windows/ Excel-like friendly user interface combined with keypad, mouse, key switch and USB port make operation convenient.
4、Flexible distributed network capability, up to 20 sets of MN3010 can be interconnected.
5、Non-polarity two-wire bus makes cabling easy and avoids mistakes.
6、Soft addressing, support mixed coding and identify repeated codes automatically, which can improve addresses usage rate.
7、Three sensitivity levels of the detector are optional at the control panel to suit different environments.
8、Special production process to make the device work at high temperature, high humidity and high altitude environment.
9、ESD static protection grade 12000V, strong anti-interference ability.
|Operating Environment||Indoors, Temp. -10℃～+55℃，relative humidity≤95%（40℃±2℃ non condensing|
|Operating voltage||AC220V±20%/ 50Hz. Input power：≤120W|
|Capacity of control panel||50/ 100/ 200/ 324 Points|
|Power supply for control panel||DC24V/6A|
|Printer||Optional Mini Printer|
|Output|| Active fire alarm output：1A@24VDC
Dry contact fault output：(one group open normally，one group close normally）1A@220VAC,3A@24VDC
|Length of circuit||Two-wire bus≤2000 meters|
|Network communication||Up to 20 sets of MN3010 can be interconnected via CAN bus.|
|Mounting||Wall-mount or semi-flush mount|
CCC (GB 4717-2005 Fire Alarm Control Unit