Home > Products > Industrial Supplies > Rubber & Plastics Machine

Electrical Heating Mode Plate Vulcanizing Machine

Technical details:

1. total pressure:20.00MN (2000 ton) Oil Pressure Bottom Type

2. heating plate size:(width*length):1100*6000mm

3. heating plate: be from one single steel plate, no joints. No compromise.

4. Heating Plate Thickness: top & bottom:80mm

5. Heating Zones No: 2

6. Heating Plate Material: steel plate-Q235; Number: 2 pieces

7. Roughness of surface of hot board Ra≤1.6μm

8. dual cold ends 300mm×2. The in and out of hot zones of hot board are designed right and left respectively.

9. Heating Plate drill dimensions DIA 24mm

10. Frame

11. thickness: 40mm other DIMS

12. width of each side: 270mm; height of top beam: 650mm

13. Distance between Bottom Platen in open position and floor: 700mm

14. material: steel plate-Q235; number: 6 set

15. daylight:400mm

16. working layer:1

17. stroke:400mm

18. Hydraulic Piston

19. diameter of piston: 500mm

20. number of piston: 6 sets

21. Material: chilled casting;

22. cylinder material: ductile casting-QT500-7; number: 6 set

23. closing speed:>=10mm/s

24. opening speed:>=10mm/s

25. pressure on plate: 30kg/cm2

26. motor power: about 33KW

27. heating mode :oil

28. Apron For Belt - 6 Set Per Side Of Each Heating Plate

29. Temperature Controlling - 4 Sensors Per Heating Plate

30. Hydraulic pump complete with all pipes, valves, gauges, motors and starters.

31. In case of power failure at buyer’s factory during production, the hydraulic pump should have a manual drive/lever to open hydraulic press

32. We can according to the customers' requirement, and manufacture the non-standard of vulcanizing machine.

33. Contact Person: Jerry Zhao 

34. Mail: jerry.zhao92@gmail.om

35. Skype: min.zhao92

36. Web: www.yefeimachinery.com