Home > Products > Industrial Supplies > Machine Hardware > Valves

Three-Piece Sanitary Ball Valve Butt Weld With High Cycle Direct Mount

NO. JOBV-1006

SPECIFICATION

 Body & end caps quality investment casting

 with High Cycle Direct Mount

 Adjustable stem packing

 Available in stainless steel or carbon steel

 Blow-out proof stem design

 100% air tested under water at 80-100 psi

 Working pressure: 1000/ 800/ 600 psi

 Temperature range (PTFE) -20F to 350F

 Temperature range (TFM) -20F to 420F

 with locking function

 End type: T-Clamp, Tube weld, Extended tube weld

 6 bolts & nuts for 4" valve

OPTION

 Spring return handle (dead man handle) 

 Oval handle

 Cavity filled seats

 Polish to custom's specification

 ASME/ BPE (for SS316L)

 low ferrite ( 3%)

 low sulphur (0.005% to 0.017%)

 Automation application

 PTFE/ PFA coating (40-70 um)

 Hastalloy C/ Super duplex/ Alloy 20/ Monel

JOBV Three-Piece Sanitary Ball Valve Butt Weld With High Cycle Direct Mount is designed for food biological, pharmaceutics or similar industries. The cavity filled seat option will help not to remain the media in the body cavity to keep from spoiling or mixing. Cavity filler seats will also help to clean the valve port easily.

The options on end types can be T-Clamp, Tube weld end, Extended tube weld end. Different material of soft kits will be applicable for different working circumstance.

ASME/ BPE (for SS316L) standard are available on 302SD, with low ferrite ( 3%), and low sulphur (0.005% to 0.017%). The finish are available for Ra 40 uin or Ra 25 u-in.

The standard bare stem type is well designed for mounting actuator directly. J&O offer pneumatic/ electric actuator and limit switch box/ solenoid valve/ modulating controller....assembling without further charge.