Electric kettle heating elements
Product Description
| 1.Electric Kettle Heating Tube |
| 2.Body Material:SUS304 |
| 3.Pipe Size:Φ6.5;Thickness0.4～0.5mm |
| 4.Conductive cap connection type: squeeze riveted to withstand tension of 5 kg |
| 5.Key size to temperature control:3.6±0.4；13.8±0.2；13.15±0.25 |
| 6.Thermostat System: STRIX control, satisfying the various demand of compatibility testing |
| 7.Flange and pipe joint with brazing,withstand 0.4MPa pressure test no leakage |
| 8.Flang Thickness:0.7mm;Material SUS304 |
| 9.Pipe to kettele bottom 8.0mm MIN |
| 10.Screw bolt resistance 1.2N.m torsion not shed |
| 11.Surface Treatment:Natural color bright heat-treatment, rustproof in water |
| 12.Customized Voltage and Power |
| 13.Overall Dimensions:spiral,OEM,customized in drawing or samples. |
14.Power on 0.5 time voltage boil dry until trip,then water cooling within 5 seconds,non-yellowing on tube surface.
Instal the heating tube and thermostat inside of kettle,inject 1L cold water,boil water until boiling by rated voltage,boiling 5 seconds later power off,then drain and cooling,inject 1L cold water again boil until boiling.So after 10000 cycles,heating tube can be still work normally. |
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
