Model: | FOSB22 |
---|---|
Brand: | Flyin |
Origin: | Made In China |
Category: | Electronics & Electricity / Optical Fiber, Cable & Wire / Optical Fiber |
Label: | Fiber Optic Switch , 2x2 Bypass Mechanica |
Price: |
-
|
Min. Order: | 1 pc |
Live Chat: | Last Online:16 Dec, 2015 |
Flyin Optronics’ 2x2 Bypass Mechanical Fiber Optic Switch (2X2B Optical Switch) connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal.
All Flyin Optronics’ 2x2 Bypass Mechanical Fiber Optic Switch (2X2B Optical Switch) support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations.
Features
l Unmatched Low Cost
l Low insertion Loss
l High Channel Isolation
l High Stability, High Reliability
l Epoxy-free on Optical Path
l Latching and Non-latching
Applications
l Optical Network
l Protection/Restoration
l Optical Singnal Routing
l Configurable Optical Add/Drop
l Transmitter and receiver protection
l Network Test System
Performance Specifications
Parameter |
|
FY-2x2B |
|
Wavelength Range |
nm |
850 |
1260~1650 |
Operating Wavelength |
nm |
850 |
1310/1490/1550/1625/1650 |
Insertion Loss |
dB |
Typ:0.8 Max:1.2 |
Typ:0.6 Max:0.8 |
Return Loss |
dB |
MM≥30 SM≥50 |
|
Crosstalk |
dB |
MM≥35 SM≥55 |
|
PDL |
dB |
≤0.05 |
|
WDL |
dB |
≤0.25 |
|
TDL |
dB |
≤0.25 |
|
Repeatability |
dB |
≤±0.02 |
|
Power Supply |
V |
3.0 or 5.0 |
|
Lifetime |
Times |
≥107 |
|
Switch Time |
ms |
≤8 |
|
Transmission Power |
mW |
≤500 |
|
Operating Temperature |
℃ |
-20~+70 |
|
Storage Temperature |
℃ |
-40~+85 |
|
Dimension |
mm |
(L)27.0×(W)12.6×(H)8.0(±0.2) customization is available |
Specification may change without notice.
Above specification are for device without connector.
Pins
Parameters |
Pins |
Electric Drive |
Status Sensor |
||||||
2×2BT |
Optical Path |
1 |
5 |
6 |
10 |
2-3 |
3-4 |
7-8 |
8-9 |
latching |
P1-P4 P2-P3 |
V+ |
GND |
-- |
-- |
Open |
Close |
Close |
Open |
P1-P3 |
-- |
-- |
GND |
V+ |
Close |
Open |
Open |
Close |
|
Non-latching |
P1-P4、 P2-P3 |
V+ |
-- |
-- |
GND |
Open |
Close |
Close |
Open |
P1-P3 |
-- |
-- |
-- |
-- |
Close |
Open |
Open |
Close |
Optical Route
Specifications |
Voltage |
Current |
Resistance |
5V latching |
4.5~5.5 |
36~44mA |
125Ω |
5V non-latching |
4.5~5.5 |
26~32mA |
175Ω |
3V latching |
2.7~3.3 |
54~66mA |
50Ω |
3V non-latching |
2.7~3.3 |
39~47mA |
70Ω
|