| Model: | HY-E608 |
|---|---|
| Brand: | Hong Ye silicone |
| Origin: | Made In China |
| Category: | Chemicals / Rubber Materials |
| Label: | shoe insoles , insoles silicone , liquid silicone |
| Price: |
US $12
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:30 Jul, 2015 |
Specifications of Silicone Insole With Soft Reliefs
Comfortable and durable Silicone Gel Insole
Ideal for any type of activity sports
Be washable and reusable
Anti-silo heel pads
Provide heel support, extra-cushioning and stability
Protect and prevent impact on the heel bone
Relax foot
More healthy, therapy product
Eco-friendly and environmental-friendly product
Shock-absorption silicone rubber
Description of liquid silicone for silicone shoe insoles/Air Massage Insoles /height increase insole
Forefoot Insole is a kind of addition cure silicone rubber. It is primarily intended for silicone insole as a kind of foot care silicone rubber. With two component silicone rubber part A and part B, mixing ratio is 1: 1. Generally the color is translucent or transparent.
Application of liquid silicone for silicone shoe insoles/Air Massage Insoles /height increase insole
It mainly use for making precision molds, silicon insoles, , Metatarsal Pad With Ring, B Shield, Adhesive Silicone Heel Spur, Toe Crest With Loop, shoe insoles, food grade molds(such as chocolate, cake moulds), for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration, baby nipples, cable accessories, etc.
Datasheet of liquid silicone for silicone shoe insoles/Air Massage Insoles /height increase insole
|
Product |
E608 |
|
Appearance |
Transparent |
|
Hardness(shore A) |
8±2 |
|
Mix ratio(A:B) |
1:1 |
|
Mixed Viscocity(mPa.s) |
15000±2000 |
|
Tensile strength (kgf/cm2) |
40±5 |
|
Tear-strength (kN/m) |
18±2 |
|
Elongation(%) |
400±50 |
|
Pot life/working time (mins) |
30-40 |
|
Curing time/setting time (hrs) |
3-4hrs(25°C) 110-20mins(60°C) |
|
Shrinkage rate (%) |
0.1 |
Features of liquid silicone for silicone shoe insoles/Air Massage Insoles /height increase insole
Excellent thermal and cold stability (-50°C~200°C)
High transparent
Catalyzed by platinum, non-toxic and no peculiar smell
Have good Electrical properties and Weathering resistance
Have good fluidity and can immit into small gap
The hardness and shock absorption property can be adjusted
Easy to be cured
Have electric capability when the electric filling is added
Storage of liquid silicone for silicone shoe insoles/Air Massage Insoles /height increase insole
Forefoot Insole is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 12 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Our service of liquid silicone for silicone shoe insoles/Air Massage Insoles /height increase insole
1: Reach the international standard high quality with competitive price !
2: Passed the certificates including the FDA, RoHS, MSDS, SGS,ISO9001:2000 !
3: Online and on-site follow-up service for product demonstration !
4: Free technical training on products usage and operation instructions !
5: Free customer service to solve technical issues !
6: Free mold opening technologies !
7: Any of our products with quality problems will be replaced within 3 months after purchase !
Why does the silicone mold appear to dry outside but wet inside?
Because molding silicone rubber is a kind of condensation silicone rubber, which get solidified
after absorbing moisture from the air. In order to provide a significant shelf-life
for the silicon rubber, we will dry out the water in the silicon rubber.
Solution: Add 0.1% water into the silicon rubber and Stir over a low speed briefly when you use it.
Why is the appearance of the finished mold striate and unsmooth?
A: It is because the appearance of the product or the model itself is not perfect
B: The product or the model has not been polished before the further operation
C: You haven’t spray the release agent evenly.So when you make silicon molds, firstly you
should choose a prefect mold and polish the it, spray the release agent evenly on the product.
In this case, the problem can be avoided.
Warm Tips
Warm Tips of Addition Cure Silicone Rubber
A.As it’s very easy to cuase uncure problem , pls clean up all the tools which had mixed with
condensation cure silicone rubber to avoid uncure problem .
B.Do not add any pigment or powder into the addition cure silicone rubber before testing to
prevent uncure.
C.Addition cure silicone rubber is bicomponent including Part A and Part B, do not add the
Part B on the container which had hold Part A,the same for part B .
D.The mixing ratio (1:1, 10:1) must in strict accordance with the ratio in case of the changing of
hardness .
Any interest, free sample are avaible for your testing, JoJo is here at your service
Shenzhen Hong Ye Jie Technology Co., LTD.
Tel: 86-755-89212380
Fax: 86-755-89948030
Mob: 86-18938867553
Email: hyxz(at)szrl.net
Skype: siliconerubber(at)outlook.com
Website: www.szrl.net
Address: A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang District,Shenzhen, Guangdong, 518117, China
