Home > Products > Toys > Remote Control Toys

Features

Lighter weight,higher convenience,better performance quality

Easy installation,simply connect to the power supply that can work independently

Suit for Gopro4 Gopro3+ Gopro3 Sport Camera

Gimbal initialization method:

The gimbal is placed,remain stationary,then turn on the power,wait gimal operation,after operating,you can pick up the gimbal to work.

The gimbal needs to be initialized when the following situations occur:

-After starting,there is a small angle deviation between pitch angle and the horizontal.

-There is a small angle deviation between roll angle and the horizontal.

-Keeping heading stationary,heading angle has frequent small angle correction.

Products Caution:

1.Please after installing the Goprp camera ,open the power.

2.Be sure to use the USB conversion head when you connect it to the computer for upgrading firmware,

3.First time using,turn on the power of gimbal,remain gimbal stationary,wait that gimbal initialization is completed,automatically back the gimbal to the horizontal position,it can be used normally,you needn't setting and adjusting parameters.

Product Details

Minimum Standard Maximum Remark

Working Voltage 7.0V 8.4V 14.0V  

Static attitude tracking accuracy 0.01 0.02 0.05 Gimbal static mode

Motion attitude tracking accuracy 0.1 0.2 0.5 Motor overload less than 2G

Motor overload protection current   800mah    

Pitch angle -150°(down) 0°(horizontal) +150°(up)  

Roll angle -45° 0°(horizontal) +45°  

Heading angle -120°   +135°  

Pitch following rate 2°/sec   25°/sec  

Heading following rate 3°/sec   75°/sec  

Weight :                                              110g (Not included camera)

Item Packing

2

Detailed Images