8kw~12kw Multifunctional sinewave power inverter
Product Description
| Features: |
|
On Inverter
1. High overload ability
2. Low battery voltage trip selectable, extracting max power from various batteries with different protections.
3. Low quiescent current, selectable sensing cycle to reduce power consumption.
On Battery Charger
1. 3-step intelligent battery charging.
2. 8 preset battery type selector plus de-sulphation for totallly flat batteries.
3. Powerful charge rate up to 70Amp, selectable charging current.
4. PFC(Power Factor Correction) for charger, less power consumption than conventional units.
On Transfer
1. Delay before transfer, extra protections for loads under generator mode.
2. Input AC voltage range selectable, for different kinds of loads.
3. 8 ms typical transfer time, guarantees power continuity.
4. 30A/40A through current ablility.
5. Output voltage regulation optional.
On remote control & other features
1. Ability to switch the unit on/off.
2. Ability to select/deselect power saver mode.
3. 17 alarms/warnings, informative for easier operation and trouble-shooting.
4. LCD status display available.
5. RS232 communication port optional.
| Model No. |
GIB-8000-D |
| Nominal Power |
8000W |
| AC Input |
| Phase & waveform |
single phase & sinewave |
| voltage |
220V/230V/240VAC |
| Acceptable Voltage |
154-273VAC(wide mode) |
| Line Low Transfer |
154V |
| Line Low Return |
164V |
| Line High Transfer |
273V |
| Line High Return |
263V |
| Frequency |
50Hz or 60Hz(Auto Sensing) |
| Line Low Transfer |
40Hz |
| Line High Transfer |
80Hz |
| Output |
| Phase & waveform |
Single phase & sinewave(bypass mode sync to input) |
| voltage |
220V/230V/240VAC(sane as input on bypass mode) |
| Voltage Regulation |
±10%rms(bypass mode sync to input) |
| Frequency |
50Hz or 60Hz(Auto Sensing) |
| Crest Power |
3 times of ratings |
| Short Circuit Protection |
Yes, shutdown |
| Power Factor |
0.9-1.0 |
| DC Input |
| Battery Voltage |
48V |
| Minimum Start Voltage |
40V |
| Low Battery Alarm |
44V |
| Low Battery Transfer |
40V |
| High Voltage Alarm |
64V |
| Max Charging Current |
75A |
| Over Charge Voltage |
62.8V |
| Transfer Efficiency |
| Line Mode |
>95% |
| Battery Mode |
>85% |
| Power Saver |
Available when the load is less than 50 Watts |
| Indicators |
| 4-LED Display |
Charge, Line, Inverter, Fault |
| LCD Display |
Input Voltage、Output Voltage、Frequency、Battery Voltage、Load, Temperature,Charge Current, Fault |
| Switch selector |
Saving Mode is on/off when push the switch forwards/backwards, keeping it horisontal is turning the inverter off |
| Audible Alarm |
Sounding when the heatsink's tem is over 105ºC and shutdown after 30 seconds |
| Protections |
low battery、over charging、over temp、over load. |
| Communications |
RJ11/RS232(Optional） |
| Enviromental |
| Operating Environment |
0-40ºC，0-90%RH(non-condensing) |
| Audible Noise |
<60dB |
| Physical |
|
| Net Weight(KG) |
56 |
| Dimension,D*W*H(mm) |
549x450x201 |
|
|
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
