Home > Products > Electronics & Electricity > Magnetic Materials

Hurricane shutter insert anchor is also called hurricane anchor, hurricane insert anchor, shutter anchor. It has a flat head profile with self-cutting serrations easily counter-sinks. The anchors are made to fasten shutter insert into concrete, brick, block, and wood base material. The anchor body is made from carbon steel. There are two lengths available, a long length for use with stucco exteriors and a short length for use directly into a base material of concrete, brick, block, or wood. The anchor produce a flush, non-protruding connection for anchoring hurricane shutters.

Specification:

• Material: carbon steel silver-plated.
• Length: a long length (2-1/8"), a short length (1-7/16").
• Head style: flat head.

Feature:

• It's special to fasten hurricane shutter.
• It's excellent corrosion resistant.
• It can resist back-out.
• It's easy to install.
• There are two lengths available, a long length for use with stucco exteriors and a short length for use directly into a base material of concrete, brick, block, or wood.
• The anchors can be used repeatedly without affecting holding values.

Hurricane shutter insert anchor is used for anchoring hurricane shutters door, the connection is flush, non-protruding.

Hurricane shutter insert anchor is used for anchoring hurricane shutters window with high-strength

Installation:

1. Use an ANSI standard masonry bit to drill a 7/16" diameter hole.
2. Clean out all the debris.
3. Insert the 5/16" hex driver into flared end of anchor.
4. Put the anchor into the hole and turn it until it's flush with the base material.
5. Attach the hurricane shutter by 1/4" -20 bolt.