Home > Products > Services > Investment Opportunities > Environment Projects

Basic Features
HWH-3200 Anti-static Kit amid Work-mat(+100-648) made with red soft leather of PVC, good flexility, resist burn and endure attrition; Due to append particular anti-static substance make with permanent static dissipative finished product，nothing to change performance of anti-static vary with the environment and the times.

Open it will be make a static dissipative work field, it would be temporal a local performance of static.

Function Features

1、Nothing S、NH+3、Hg、Pb etc any injurant in the material,it can be not harm to anybody.

2、To make use of assembly for varied tools, while the operator to use tool to provide route of static dissipative.

3、Outfit assembly of grounding: one aspect fit on the wrist strap, and one end grounding to dissipative static to mother earth, so that to dispel static of body, to safeguard safety for electron products and organ.

4、You can may be impress a surface with your need Logo or another mark

5、It is lustration, may be clean. It use knitting to sew up the fringe.

Using Area

When in not suitable to set up special ESD protection workaround and workbench district that it must be to operate for anti-static, it can be provide effective protection instrument. If so assist operator with progress field-work andservicing etc dealing in not specified safety products of ESD.To operate any product before, youmust be to turn off the power.

Technical parameter

ItemTest methodTest valueObey standardStandard value

Surface resistanceSJ/T 10694-1996107ΩGJB3007-1997106-109Ω

Volume resistanceSJ/T 10694-1996107ΩGJB3007-1997106-109Ω

Friction voltage10694-19960 VGJB3007-1997＜100V

Specification & product pictorial drawing


Specification of work-mat: 610*550*7.7mm

Couple products: (1) work-mat（+100-648）

(2)Kits ground wire（+100-649）

(3) snap fastener anti-static wrist strap (HWH-818)

Using method

1、Would be not to pucker the work –mat put it anear the table of workaround or floor board, to take out the ground wire and the snap fastener anti-static wrist strap from Kit.

2、One midst of kit ground wire to connect on the connection mast of workaround, one end the alligator clip of ground wire anear connect that need to replace or move metal surface of product, but the surface must be include a part of product-cell; another ground wire connect on the snap fastener anti-static wrist strap, also to adjust the snap fastener strap to connect bared skin.

3、Begin to work.

4、All the process wind up, to dismantle locales safety tools to pucker package renewedly.

Shipment package data

Package material :paper-box

quality of Package material :A=B

out side of Package material :285*215*140

Amount:1pcs

Package products amount:10sets