| Model: | - |
|---|---|
| Brand: | - |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Other Electronic Instrument |
| Label: | tunning fork switch , level switch , alarm switch |
| Price: |
US $100
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:30 Oct, 2015 |
Tunning fork level switch/ level alarm switch with relay output
tuning fork vibration level switch is caused to vibrate by the resonance
of the piezoelectric crystal. When effected by the material damping, the amplitude
suddenly reduces, then the frequency and phase change significantly. These
changes will be detected by the internal electronic circuit, and be transformed into
a switching signal output. The product can monitor, control and alar m the high and
low bit of tanks. Also it is suitable for a variety of liquid, powder , granular solid. It is
practical, simple, reliable, adaptable and maintenance-free. The tuning for k
and output have working condition and diode indicator, which can be adjusted as
habit. Also it has two power supply input modes(220V AC and 24V DC) and many
power supply output modes(DC output type, DC voltage output type, relay contact
output type). All types have high and low alarm sets, which can be done sensitivity
setting according to the situation.
Parameters
| medium temperature range | -20 ° C to 220 ° C |
| ambient temperature | -20 ° C to 80 ° C |
| ambient humidity | ≤ 95% RH |
| measured medium | liquid, powder or granular solid |
| measured medium density | solid ≥ 0.1g/cm3, liquid ≥ 0.7g/cm3 |
| measured solid particle size | ≤ 10mm |
| maximum liquid viscosity | <1000mm2 / s
|
| measured medium
repose angle |
≥ 200 |
| pressure range | ≤ 1MPa |
| shell material | die-casting aluminum alloy |
| fork material | 1Cr18Ni9Ti |
| shell protection | IP65 |
| connection | 1 "NPT thread / flange (two ways) |
| electrical parameters | 1: supply voltage: 24 V DC; 220V AC 50Hz
2: output signal: relay output double-pole double-throw (DPDT) contact capacity: 8A 220V AC 4A 24V DC 3: power consumption: ≤ 2W |
| tuning fork vibration frequency | 300 ± 500HZ |
Order sheet
| Model | Name |
| Tuning Fork Switch | |
| Code | Power Supply |
| 1 | 220V AC |
| 2 | 24V DC |
| Code | Temperature Type |
| H | High Temperature Type |
| S | Common Type |
| Code | Fork Sort |
| A | Standard Type |
| C | Shock Rod Type |
| S | Compact Type |
| Code | Fork Type and Insertion Dept h Range |
| G1 | Small Fork 45mm~3000mm |
| G2 | Standard Fork 100mm~3000mm |
| Code | Process Connection/Material |
| N1 | 1″ NPT thread/304ss |
| G1 | G1″ thread/304ss |
| D25 | DN25 PN4.0MPa/304ss |
| D40 | DN40 PN4.0MPa/304ss |
| D50 | DN50 PN4.0MPa/304ss |
| TC1 | 1″ Clamp/304ss |
| TC2 | 2″ Clamp/304ss |
| Code | Shell/Cable Interface Size |
| A1 | Die-cast Aluminum Shell Explosion-proof IP67/NPT 3/4″ |
| A2 | 316ss Shell Explosion-proof IP67/M20X1.5 |
| Customers Supply | Insertion Length |
