| Model: | AEO-HD812M-8E |
|---|---|
| Brand: | AEO |
| Origin: | Made In China |
| Category: | Security & Protection / Surveillance Equipment |
| Label: | Management , Industrial , Switch |
| Price: |
US $187
/ pc
|
| Min. Order: | 5 pc |
| Live Chat: | Last Online:24 Sep, 2015 |
Email: tina@aeo-cctv.com skype:karlie@aeo-cctv.com Tel:86-755-86276677
Product Introduction
The device of Managed Industrial Ethernet Optical Switch adopts industrial redundant ring network design to transfer multiple 1080P HD network signals without delay over one single fiber, the max transmitting distance between two adjacent devices is up to 100 KM (0~20/40/60/80/100 KM are optional). It can be connected hand-in-hand with each other through the cascade to form a ring network topology. The redundant ring network structure not only can reduce the risk of the transmission of data signal, but also it simplifies engineering installation and lowers the engineering cost. The design of industrial redundant ring network is to realize stability, reliability and real-time performance of data transmission in harsh environments. Together with the embedded WEB mastering control Sever, it becomes easy for the control of network management.
Product Description
● Compatible with IEEE802.3/802.3U/802.3X/802.3D/802.3W protocols
● Supports WEB mastering setting, easy for control
● Supports 8K MAC address
● Supports full duplex and half-duplex transmission mode, and with automatic negotiation ability
● With APC circuit, constant output optical power, large dynamic range
● Advanced adaptive technology, without the need for on-site electrical or optical adjustment when using
● Provide ultra low latency data transmission
● Ethernet interface can be adaptive to parallel lines / crossover cable connection
● The long distance between 2 adjacent devices is up to 100 KM
● Design with industrial level, IP30 grade of surge protection
● Redundant dual DC power input, power supply overload protection, Anti-reverse polarity protection
Technical Parameter
|
Item |
Description |
|
Network interface |
10/100Base-T(X) Self-adaptive Ethernet port |
|
Transmitting rate |
100 Mbps |
|
Network port attributes |
The connector type：RJ 45 Compatible with IEEE802.3/802.3u/802.3ab protocols.
|
|
Optical wavelength |
1310 nm/1550 nm |
|
Optical interface |
SC、LC、FC Optional |
|
Optical port attributes |
Optical power ≥－10dBm
|
|
Backplane bandwidth |
7.6 G |
|
Cache |
1Mbit |
|
Max frame size |
1632 bytes |
|
Delay |
<1 µS |
|
BER |
<1/1000000000 |
|
Transmitting distance |
Single fiber single mode 0~100 KM |
|
Rated input voltage |
DC 12 V~ 48 V （DC 48 V for PoE solution） |
|
ESD electrostatic protection (Ethernet) |
±8 KV Contact discharge
|
|
Surge protection （Ethernet） |
Common mode ±4 KV(10/700 µS) Differential mode ±2 KV(10/700 µS) |
|
Surge protection （Power supply） |
5000 A(8/20 µS) |
|
Power consumption |
<5 W |
|
Working temperature |
-40℃ ~ 85℃ |
|
Working humidity |
5% ~ 90% |
|
Dimension (Length × Width × Height) |
184 x 181 x 53.5 mm |
|
Weight |
1.3KG |
Application diagram
Fiber transmission: 0~100KM (optional)
