Home > Products > Electronics & Electricity > Optical Fiber, Cable & Wire > Communication Cable

Description

ADSS cable is made of non-metallic material and self-supporting with the aerial power transmission line. The tension resistance material is aramid yarn with high elasticity modules. And optimizing structure can deploy the weight of the cable and its mechanical and physical properties appropriately and minimize the load on the tower.

Application Scope

Environment with high electric field strength in the Power communication system and the area where frequent thunder happens

Features

• Can be installed without shutting off the power
• Excellent AT performance ,The Maximum inductive at the operating point of AT sheath can reach 25 KV
• Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
• Large Span lengths and the largest span is over 1000m
• Accurate control on Aramid application greatly improving the strength of cables
• Accurate fiber excess length and stranding pitch to ensure the good performance of tensile strength and the temperature
• The design life span is over 30 years

• ADSS cable structure 

• ADSS cable is the short form for All-dielectric Self-supporting Optical Cable.
• ADSS fiber optic cable is loose tube stranded; the tubes are filled with water resistant filling compound.
• The tubes are stranded around fiber reinforced plastic are a non-metallic central strength member into a compact and circular cable core.
• After the ADSS cable core is filled with filling compound, it is covered with a thin PE inner sheath, after two layers of Aramid yarns which are applied in two directions over the inner sheath as strength member,
• ADSS optical fiber cable is completed with PE or AT outer sheath.

  ADSS cable structure 

• ADSS cable is the short form for All-dielectric Self-supporting Optical Cable.
• ADSS fiber optic cable is loose tube stranded; the tubes are filled with water resistant filling compound.
• The tubes are stranded around fiber reinforced plastic are a non-metallic central strength member into a compact and circular cable core.
• After the ADSS cable core is filled with filling compound, it is covered with a thin PE inner sheath, after two layers of Aramid yarns which are applied in two directions over the inner sheath as strength member,
• ADSS optical fiber cable is completed with PE or AT outer sheath.