Home > Products > Office Supplies > Office Consumable > Other Office Consumable

OCE IH-035 Printhead Resetter /Printhead reset tools for IH-035

Instruction for OCE IH-035 Printhead reset Tool

A. Product Function

1.Help to detect and reset the print head data; Change printhead model; Make it useful for
printer models.
2. For printer fault detection. When have difficulty in judging the print head or machine fault, reset the print head,
Then test with other printers.
3.Change the print head model, reset PF-03 PF-04 PF-05 print head to IH-035 print head.
4. Cancel printhead error message. (Usually use for false error, not the printhead itself)
this function without promise, buy you can try to test.)

B.Why you need IH-035 Printhead reset tool?
a. IH-035 printhead use for many printers, after installing, the printer will read the printhead data, so you
cannot install other printer’s head on this printer. But if you have printhead resetter, you can do it. Our
printhead reset tool can reset the printhead data.
b. IH-035 printhead cost is high, and fewer in the market. You can reset PF03/PF04/PF05 printhead to IH-035
Printhead, and it works perfect.
c. Sometimes, the printhead has error message, but you are not sure if printhead broken or printer’s problem.
If replace a new head directly, cost is too high. If you reset it and test again, maybe it works. Or test with
other printers, you will know if printhead broken or not.

C. How to use?
1. Turn off printer, Remove Power supply, take off printhead carefully;
2. Connect power line with resetter and computer;
3. Put printhead (PCB side on printhead resetter, make the reset pins touch well with printhead connectors.
4. one hand press printhead on resetter, another hand press the black reset button, then indicator light will become read,Blink a few seconds the light become to green, it reset successful.
5. If the light is red after reset, try again or check other problem.

D.Attention:
a. Printhead PF03 PF04 PF05 could be resetted to IH-035 Printhead. 
b. The resetter light doesn't work, there are several general conditions:
1. Dead power line;please check if power supply well.
2. Connecting line is broken; open it and check, to repair welding
3. The print head short circuit, or clog for a long time please give up the print head to avoid printhead damaged.
4. Please note the resetter pins, never touch them.when you put the printehad on resetter,
Press it lightly, don't press overexertion. Avoid circuit board fall off.
Place, never damage to the reset pins.