Model: | TPW-050100 |
---|---|
Brand: | Top Power |
Origin: | Made In China |
Category: | Electronics & Electricity / Power Supply & Distribution / Power Adaptor |
Label: | 5V 1A power adapter , power charger 5v 1a , 5v 1a power adapter |
Price: |
US $1
/ pc
|
Min. Order: | 50 pc |
Last Online:09 Sep, 2015 |
Features:
• Universal AC Input of 90-264VAC 50/60Hz
• No load power consumption max. 0.3W meets MEPS level V efficiency standards
• Input fuse protected
• Output 5 Volts 1 Amps
• Output short circuit, over load and over voltage protected
• Operating temperature 0-40°C
• Full international safety approvals and CE marked
• 2 years warranty
MODEL | TPW-0501000 | |||||
OUTPUT | DC VOLTAGE | 5V | ||||
RATED CURRENT | 1A | |||||
CURRENT RANGE | 0-1A | |||||
RATED POWER | 5W | |||||
RIPPLE&NOISE(max.) Note.2 | 120mVp-p | |||||
VOLTAGE TOLERANCE Note.3 | ±5% | |||||
LINE REGULATION Note.4 | ±0.5% | |||||
LOAD REGULATION Note.5 | ±1% | |||||
SETUP,RISE TIME | 100ms,50ms/230VAC 100ms,50ms/115VAC at full load | |||||
HOLD UP TIME(Typ.) | 20ms/230VAC 10ms/115VAC at full load | |||||
INPUT | VOLTAGE RANGE | 110-240VAC | ||||
FREQUENCY RANGE | 47-63Hz | |||||
EFFICIENCY(Typ.) | 80% | |||||
AC CURRENT(Typ.) | 0.3A 230VAC 0.5A/115VAC | |||||
INRUSH CURRENT(Typ.) | cold start 30A 230VAC | |||||
LEAKAGE CURRENT | <2mA 230VAC | |||||
PROTECTION | OVERLOAD | Above 120% rated power | ||||
Protection type:Hiccup mode,recovers automatically after fault condition is removed | ||||||
SHORT-CIRCUIT | Protection type:Hiccup mode,recovers automatically after fault condition is removed | |||||
ENVIROMENT | WORKING TEMP. | -10℃~+40℃ | ||||
WORKING HUMIDITY | 20%~90%RH | |||||
STORAGE TEMP.,HUMIDITY | -20℃~+85℃,10%~95%RH | |||||
TEMP.COEFFICIENT | ±0.03%℃(0-40℃) | |||||
VIBRATION | 10-500Hz, 2G 10min./1cycle,period for 60min. Each along X,Y,Z, axes | |||||
SAFETY | WITHSTAND VOLTAGE | I/P-O/P:1.8KVAC I/P-Case:1.8KVAC | ||||
OTHERS | DIMENSION | 60*25*40mm(L*W*H) | ||||
PACKING | 0.08KG,100PCS/8.6KGS/0.056CBM | |||||
NOTES | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temparature | |||||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminal with a 0.1uf&47uf parallel capacitor | ||||||
3.Tolerance:includes set up tolerance,line tolerance and load tolerance | ||||||
4.Line regulation is measured from low line to high line at rated load | ||||||
5.Load regulation is measured from 0% to 100% rated load. |