Electrochemical fuel cell sensor alcohol tester
Product Description
Principle of measurements Electrochemical/fuel cell sensor, alcohol specific
Measurement range (BrAC) 0.000mg/L~1.500mg/L
Resolution 0.0001 mg/L
Accuracy: Max. Measure error, in relation to ethanol standard Ethanol Vapor Concentration
C /(mg/L) Deviation
C<0.400 ±0.020mg/L
0.400≤C<1.000 ±5%
C≥1.000 ±20%
Repeatability of Indicating Value Ethanol Vapor Concentration
C /(mg/L) Deviation
C<0.400 0.007mg/L
0.400≤C<1.000 1.75%
C≥1.000 6%
Calibration Every 6 months
Temperature Range-Operation -5℃~45℃
Temperature Range-Storage -20℃~70℃
Optimum Storage Condition Temperature 20℃±5, Humidity: <80%RH, Pressure: 86kPa~106kPa, No vapor or electromagnetic disturbances in the environment are influencing the normal working conditions of the device.
Blowing Time 3 seconds (breath flow≥20L/min)
Warm-up Time Less than 5 seconds after switching on
Recovery Time 5 seconds to 5 minutes, depends on Ethanol Vapor Concentration
Analysis Time Less than 10 seconds
Display 128×64 dot matrix black and white screen
Dimensions Approx. 127mm×60mm×28mm
Memory 10,000 records
Operation Voltage State of Charging State of Operation
5 V DC 3.6~4.2V
Battery Built-in 1000mAh/3.7V Li-ion polymerized battery
Weight Approx. 115g
Product Image
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,