Product Description
BRIFE INTRODUCTION
PRESISION LCR Meter HPS8106
HPS2806 SERIES IS A NEW PRESISION LCR METER WITH 6 CHANNEL3 AND A
HIGHER TEST FREQUENCY .THIS INSTRUMENT HAS A BASIC ACCURACY OF 0.05%,THE MAXIMUM TEST FREQUENCY IS 100KHZ.IT IS EASY TO OPERATE WITH 240×64 dot-matrix LCD display ONLY IN CHINESE ,FUUL INTEGRATE LCR TRANSFORMER TEST FOUNCTION AND BALANCE TEST FOUNCTION GREATLY IMPROVE THE TEST EFFECIENCY
MAI PARAMETERS
LCR Meter HPS8106
- Signal frequency: from 50Hz to 100kHz and it has more than different point of frequency
- Basic accuracy: 0.1%
- test electrical level 0.1v-2v
- 6 channels
Technical Data
- Test parameter: |Z|, C, L, X, B, R, G, D, Q, θ
- Test level: 0.1Vrms to 0.3Vrms, 1.0V steps
- Measuring speed: Fast: 20meas/sec
- 240×64 dot-matrix graphics LCD display
- Friendly user's interface and easy operation
- Equivalent circuit: Series and parallel
- Math function: Deviation and percent deviation
- Ranging mode: Auto, Hold
- Trigger mode: Internal, Manual, External and Bus
- Correction function: Open, Short and Load corrections
- Delay time: 0—60sec , with step of 1ms
- List sweep: List sweep for up to 4 frequencies, signal levels and DC bias levels
- Display Mode: Direct, ΔABS, Δ%, V/I( V/I monitor), Bin number and bin counter
- Display: 240×64 dot-matrix LCD display, 6-digit resolution
- Output impedance: 30Ω , 100Ω
- Memory: 12 control settings memory for store/recall
- Interface: RS-232C and HANDLER
- Weigth: 4.8 kg
- Measurement display ranges
R: |
0.00001Ω - 99.9999MΩ |
G: |
0.00001µS - 999.999S |
C: |
0.0001pF - 999.999mF |
L: |
0.00001µH - 9.99999kH |
Q: |
0.00001 - 99999.9 |
D: |
0.00001 - 9.99999 |
∆%: |
-999.999% - 999.999% |
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,