Home > Products > Industrial Supplies > Pharmaceutic Machine

Features

• A graphic HMI program that is easy-to-use and a reliable PLX system have been adopted.
• Through the use of an HMI program that is suitable for 21CFR PART 11, only approved users can change control variables.
• The highest-level of credibility and safety are guaranteed through the use of the PLC system.
• Pollution is prevented during a blackout. This product can work normally after a blackout by using a program to compensate for a blackout.

Specification

• High performance design
• Vessel with water jacketed and insulation
  (STS316L vessel + ST304 jacket)
• Automatic sterilization
• 700 ~ 500,000 L total volume or more
• Top plate
  -Inoculum port : Aseptic inoculation valve (option: Flaming)
  -Pressure gauge and transmitter port
  -Foam sensor port
  -Exhaust port & condenser
  -Agitation (top drive only)
  -Light and spare ports
  -Sight glass
  -Manhole
• Upper side wall
  -3 media port
  -Gas overlay port and spare port
• Lower side wall
  -Sampling port
  -Temperature, pH, DO sensor port and spare port
• Bottom
  -Harvest
  -Agitation (bottom drive only)
• Agitation
  -Double mechanical seal
  -High torque AC geared motor
  -4 baffles or more
• Aeration
  -Ring sparger (option : 1 ~ 10㎛ micro sparger)
  -0.2 ㎛ disposable hydrophobic filter with check valve
• Impeller
  -Rushton type/Pitched blade/Marine blade
• Gas flow
  -1-TMFC + bypass rotameter
  -Flow rate : max 1 vvm or more
  -2 or 3 TMFC (option)

Control

• 17” touch screen computer
• 1 to 255 vessels intelligent control
• 16 control loop per vessel
• Temperature control : PID control with water jacket heat exchanger(or heater) and circulation loop
• pH control : acid/base agent
• Agitation control : speed control
• DO control : PID cascade control with agitation, feeding and gas flow rate
• Antifoam control : antifoaming agent
• Feed control : fed-batch control by time, DO, pH
• Flow control : 1 ~ 4 mass flow control per vessel
• 8 multi trend log data per vessel
• Easily calibrated sensors
• Level control : electrode type Hi/Low level control load cell type weight control(option)
• Optional sensing unit : ORP, OD, 2nd pH, 2nd DO