Home > Products > Industrial Supplies > Plate Making & Printing Machine

Usage:

     Installed on the sealed cup pad printer to store ink and thinner; Meantime, Both Covering ink and removing ink function same as Steel blade. Sealed cup is consist of two parts: the Ink Cup ring and body part , The ring part of the installation in the cup body, wear occurs when the ring can be replaced. Now the knife ring are made of common two materials: ceramic and tungsten steel.

Technical Parameter:

60mm diameter:

• Point Angle: 60 Degree;
• Hardness: 62 Degree;
• Material: Tungsten Steel;Ceramic
• Diameter of Inner loop: 60mm.

90mm diameter:

• Point Angle: 60 Degree;
• Hardness: 62 Degree;
• Material: Tungsten Steel;Ceramic
• Diameter of Inner loop: 90mm.

140mm diameter:

• Point Angle: 55 Degree;
• Hardness: 63 Degree;
• Material: Tungsten Steel; Ceramic
• Diameter of Inner loop: 140mm.

Production Advantage :

• Well abrasive Resistance, long useful time;
•  
• Sophisticated cutting edge, compact with Steel plate;
• Idiosyncracy angle of cutting edge, fit storing and coating ink;
• With mouth on the top, easily change and add ink and thiner;
• Magnet Decentrality distribute, removing ink easily but light press;
• Change Ceramic ring to match Resin plate;
• Ink can be cleaned easily.

Use Method:

• Taking of steel plate from sealed cup pad printer;
• Cover the sealed cup on steel plate slowly, then move it to the center of steel plate;
• Install steel plate coverred with sealed cup on pad printer;
• Fix the steel plate, Fix sealed cup to the cup frame;
• Adding ink and thiner into sealed cup, push the sealed cup and examine ink;
• Increase the pressure ensure removing ink completely.

Caution:

     There is sharp cutting edge which has high brittleness, Please aviod Collision and dropping; Because of Magnetism, When closing to steel objects, Please controlling speed.

Storage:

Store in Pliable case made by Foam. Avioding contact with steel materials.