Home > Products > Chemicals > Adhesives & Sealants

~Features:
 1.One component,neutral curing,non-corrosive to metal and PCB materials etc.
 2.Excellent electrical insulation and chemical stability, all-round protection to the components.
 3.Excellent thermal conductivity.
 4.Excellent moisture, ozone and corrosion resistance.
 5.Remains flexible over a temperature range of -40℃ to 180℃.
 6.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber.

Main applications:
1.Used as heat catalysis for contact surface between heat element and heat sink.
 2.Used as coating material for many kinds of microwave device.
 3.Used as heat transfer, insulated, embedding material for transistor and semiconductor transistor.
Limitations:
 1.Not to surfaces containing grease.
 2.Is not suitable for airtight place.
 3.Not to copper-coated or other similar sensitive metal surfaces.
 4.Is not suitable for the place of continuous immersion or year-round moisture.
 5.Surface temperature is not below 0℃ or above 50 ℃.
 6.Can not contact with strong acids or bases.
 7.Hasn’t performed adhesion and compatibility tests on project substrates and all accompanying accessories.

Typical properties:
 These values are not intended for use in preparing specifications.

Test Method Property Unit Result
GB/T 13477 Specific gravity g/cm3 2.0
GB/T 13477 Working time at 25℃ min. 31
GB/T 531 (ISO 7619) Hardness Shore A 69
GB/T 528 (ISO 37) Tensile strength MPa 2.5
GB/T 528 (ISO 37) Elongation at break % 49
GB/T 1692 Volume resistivity Ω·cm 6E+14
GB/T 1695 (ASTM D 149) Breakdown strength kV/mm 21
GB/T 1693 (ASTM D150) Dielectric constant 1MHz 3.1
GB/T 11205 Thermal conductivity W/m·K 1.1

GB: Chinese National Standard
 ASTM: American Society for Testing and Materials
 ISO: International Standardization Organization
 The “GB” testing method is equivalent or partly equivalent to that in the“( )”

Installation:

1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application.Using proper materials and cleaning procedures is vital for sealant adhesion.
 2.Cleaning materials: clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required).
 3.Cleaning procedures:Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again.
 4.Primers: TG281 Thermal conductivity silicone sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated.

Emergent Treatment:
 Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.

Shelf Life:
 9 months from the manufacture date stored in cool & dry place below 27 ℃.
 
Color:
 Clear, black, white, gray, other colours as clients’ requirement.

Packing:
 Disposable cartridges：net 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box.  Sausages：net 590ml, 500ml; 20 pcs / box.

LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.’s products are safe, effective, and fully satisfactory for the intended end use.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD. SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD. DISCLAIMS LIABILITYF OR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.