Home > Products > Electronics & Electricity > Optical Fiber, Cable & Wire > Optical Fiber

4 core Single loose tube Non-armored  GYXY  cable       

1.Description

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The Non-armored GYXY chromatic technologies fiber optic cable   is completed with a polyethylene (PE) sheath.

 2. Characteristics

1.Good mechanical and temperature performance.

2.Two parallel steel wires ensure tensile strength.

3.High strength loose tube that is hydrolysis resistant

4.Special tube filling compound ensure a critical protection of fiber.

5.Small diameter, light weight and friendly installation

Packing & Shipping for  4 core Single loose tube Non-armored  GYXY  cable   

Packing& Shipping        

The following printing(white hot foil indentatioin)is applied at 1-meter intervals.

1.Supplier: As cuctomer required

2.Standard Code(Product Type, Fiber Type, Fiber Count): Aerial/Duct/Buried SM/MM xx F

3.Year of manufacture: xxx

4.Length marking in meters

5.Cable ID / Drum No.

The accuracy of marking is ±0.5%. Occasional loss of printing and remarking is in accordance with

Bellcore GR 20 and supersedes earlier marking. Cables can be supplied with a range of single mode

or multimode fibers and customized printing.