Home > Products > Industrial Supplies > Construction Machine

Product description(www.caigangjx.com)

Floor 750 bearing plate molding equipment features a: guide four pillar type high speed high-quality goods molded tile equipment: the number of advanced technology, the host "body" without welding, all the "cast" make and become, so the machine won't because "welding" to produce "stress" and lead to the host machine body deformation. Host "cylinder pressure and Lord tile die" by "the orientation set of" binding in the 120 mm "four solid oriented hydraulic pillar", "Lord tile die" under vertical operation, won't produce vertical deviation, especially vulnerable to Lord tile die, absolute protection, but also greatly extended the service life of the "Lord tile die". Caigang pressure tile machine features: first generation, second generation "automatic molding Caiwa equipment" all use "swing cylinder drives the sliding platform", "swing cylinder" belongs to "moulded color tile equipment" is "extremely vulnerable" accessories, if the forming speed is too fast, resulting in slide impact force and buffer easy vibration, resulting in tile cracks, is the first and second generation color tile equipment "illness". So the speed of the molding is 6 per minute. And "guide four pillar type moulded Caigang equipment", the is "built-in vertical cylinder" slide a driver using the intelligent hydraulic buffer technology. Hydraulic buffer can be adjusted freely slide to slide, smooth operation, safe and reliable.(www.caigangjx.com)

688 floor board forming equipment

The device configuration manual uncoiling machine, forming machine, hydraulic cutter, electric control system, hydraulic system, rack for building bearing pressure plate type.

Technical parameters

1 automatic internal tension uncoiling machine

A. coil diameter

B. maximum 1000mm

C. maximum load weight:6000kg

D. hydraulic power: 3kw

E. motor power: 3kw

F. cylinder diameter: 120mm

G. working pressure: 10Mpa

2 molding machine

A. frame line: 24 row: 24 steps

B. 45# steel steel processing, outer diameter 80mm. Roller material 15GCR bearing steel processing HRC58-60.

D. main motor power: 22kw

E. rolling speed: 9-12m/min

F. 350# steel welding

Hard chromium plating on the surface of G. roll 0.05mm.

3 hydraulic cutter

A. blade material: Cr12 quenching process

B. cutting system: the use of advanced hydraulic drive, automatic cut off after forming, no deformation, no waste, higher safety factor (the main engine shutdown)

4 electronic control system

A. screen: 5.7 Inch Touch Screen in Taiwan Delta

B. host computer (PLC): the Taiwan Delta DVP14ES

C. encoder: South Korea Nicks Otto ENC-1-1-1t-24

5 Hydraulic System

A. the use of advanced hydraulic system in Taiwan

B. power: 4KW