| Model: | 860\840 |
|---|---|
| Brand: | xingyue |
| Origin: | Made In China |
| Category: | Industrial Supplies / Construction Machine |
| Label: | Color , Pressure tile machin , Fully automatic |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:01 Jul, 2015 |
Product description
Type 860 single board automatic color steel molding equipment parameters（www.caigangjx.com）
Dimension: 6200mm*1350mm*1300mm
Motor performance: first, host power: 3kw
Computer cutting power: 3kw
Hydraulic pressure: 10 - 12Mpa
Computer control system: PLC computer
Molding board features: 1. Thickness: 0.25-0.6mm
Feeding width: 1000mm
Effective area: 860mm spacing: 215mm depth: 20mm
Production speed: 12000mm/min
Equipment features: 1. Machine including: machine, PLC computer control system, special shear system, professional hydraulic system
II. The production of the product appearance tidy and beautiful, uniform lacquer, high strength, durable, widely used in the industrial and civil buildings, such as workshop, warehouse, garage, hangar, gymnasium, exhibition halls, theaters and other real faces and wall body.
Gross weight: about 2500Kg
~Type 840 single board automatic color steel molding equipment parameters
Length x width x 1300mm x 6400mm x 1000mm
Shaping axis: 45# 70mm diameter
Forming wheel: material 45# hard chromium plating
Transmission mode: chain wheel, chain
Motor: 3KW
Molding line number: 11 row
Fully automatic computer cut off system:
Pump station motor: 3KW four
Cutting tool: Gr12
Forming speed: 8-10m/min
Press thickness: 0.2-0.7mm
Pressing width: 1000M
840 type steel molding equipment according to the production needs of the production of different appearance of the roof, and high rate of finished products. Side and end of the color board. When installing each piece of steel, it should be placed on the side of the front piece of the plate accurately, and with the previous piece of steel clamping, until both ends of the plate are fixed so far. A simple and effective method is to use a pair of clamp pliers to clamp the overlapping plate. In the general Southern color plate design for single color plate, in order to reduce the solar radiation heat into the interior of the building, in the installation of the roof panel can in the roofing systems are installed with heat insulation layer. There is a very simple, economic and effective method, namely before installation of roof plate, in the purlin or attrib wattle spread double-sided reflection foil film, this method can also as steam isolation to reduce the rally.
