| Model: | C830 |
|---|---|
| Brand: | GUOCHUANG |
| Origin: | - |
| Category: | Chemicals / Rubber Materials |
| Label: | liquid siilcone , rtv silicone , silicone rubber |
| Price: |
US $5.28
/ kg
|
| Min. Order: | 200 kg |
| Live Chat: | Last Online:29 Jun, 2015 |
good price of liquid silicone rubber for mold making silicone for culture stone mold plaster casting mold
1.Description of Mould Making Liquid Silicone Rubber,RTV Silicone rubber,gypsum decorations silicone mold
C830 Silicone rubber is condensation cure silicone rubber for mold making. The silicone rubber will be cured under room temperature, It’s two-components, the mixing ratio is 100:2 . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability.
2.Characteristics of Mould Making Liquid Silicone Rubber,RTV Silicone,clay crafts mold making
*An exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*soft hardness
*copy detailed pattern
*good flexibility
*eco-friendly
*long shelf-time &lifetime
3.Application of Mould Making Liquid Silicone Rubber,RTV Silicone,Concrete Statue Molds
C830 silicone rubber is perfect molding material., it is suitable to make mold for concrete stone, cement casting , gypsum decocations, plaster product, resin craft, soap,candle, bronze casting, wax, crystal, tyre mold ,shoe mold ,clay casting ,soap mold,ceramic casting ,etc..
C830 Silicone rubber is mainly suitable middle sized product and big size with simple pattern
4.Datesheet of Mould Making Liquid Silicone Rubber,RTV Silicone,Concrete Statue Molds
| Item No. | Appearance | Hardness (shore A°) | Viscosity (CPS) | Tensile-strength( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing ratio | operation time (25 ℃) | Curing time( 25℃) | shrinkage |
| C830 | White | 30±2 | 22000±1000 | ≥45 | ≥26 | ≥480 | 100:3 | 20-30 mins | 2~3 h | ≤0.3% |
5. Using instructions of Mould Making Liquid Silicone Rubber,RTV Silicone,Concrete Statue Molds
Step 1: prepare and clean the prototype.
You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material(like cardpaper) to make a frame for to surround the prototype. The frame is no need ,if we make the mold by brushing way .
Step 2: Take the silicone and catalyst as the ratio 100:2 (silicone:catalyst=100:2) ,mix the silicone rubber and catalyst evenly.
*Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. What’s more, the finished molds will have a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.
Step 4: Pouring cast or brushing cast
After released the bubble, we can pour/brush the silicone rubber on the prototype
*Notes:Please finished all the steped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available.So,we have to pay attention to the pot life and curing time.
Packaging & Shipping
6. Package and shelf life of Mould Making Liquid Silicone Rubber,RTV Silicone,Concrete Statue Molds
Package
1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum.
Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
Company Information
7.Company Profile of GUOCHUANG Silicone
Dongguan Guochuang Organic Silicone Material Co., Ltd. established in 2009, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber and silicone mold. We sets up HongKong GuoChuang silicone technology Co.,Ltd., other affiliated enterprises in 2015.
We have passed ISO9001:2008 Quality Management System. We have five main groups of people: R & D team which is rich in theoretical knowledge and work experience; sales team who are proficient in several languages and with high level of business & after-sale service;With such a team, we promote our silicone rubber to Southeast Asia, Europe, the Middle East , the America and etc, and our silicone rubber is well-received by the customers from more than 40 countries and regions.
We believed that we can really provide you the high quality and competitive price , and even the technical support and perfect after-sales service.We will offer the best solutions to promote both of our business and make the win-win situations.Thanks !
Any questions, pls feel free to contact us , it will be our great pleasure at service for you:
E-mail: info(at)gcsilicone(dot)net
Skype: allen.jou01
Mobile:86-18682484160