| Model: | - |
|---|---|
| Brand: | meishuo |
| Origin: | Made In China |
| Category: | Construction & Decoration / Construction Accessories |
| Label: | metal stair nose , stair nose molding , carborundum stair |
| Price: |
US $3.1
/ meter
|
| Min. Order: | 100 meter |
| Last Online:20 Sep, 2016 |
|
Grade: |
Aluminum 6063 6463 etc |
|
Temper: |
T5/T6 |
|
Place of origin: |
Jiangsu, China |
|
Port: |
Shanghai |
|
Payment terms: |
T/T L/C |
|
Delivery time: |
15-30 days after receiving deposit |
|
Application: |
Protect the edge of tile framings of decorative elements |
|
Features: |
1.Simple and easy for installation; 2. Attractive and elegant looking. 3.Nice straightness and smoothness 4.High corrosion resistance, high weather resistance and good wear resistance |
|
Finish: |
natural, anodised: matt silver, bright silver, brushed, bright gold, matt gold, bronze. Powder coating color |
|
Height: |
6, 8, 10, 11, 12.5,15mm |
|
Length: |
2.44m,2.5m,2.7m,3.0m. |
|
Specification: |
1. Normal anodizing thickness: 8 to 12 micro 2. Normal powder coating thickness: 60 – 100 micro 3. Tensile Strength: ≥160 MPa 4. Yield strength: ≥110 MPa 5. Extensibility: ≥8% 6. Hardness (HW): ≥8 |
|
Packing: |
Normally, each piece stick protective film and label, 10pcs/bundle, 60pcs/carton or tube |
|
Remark |
We can introduce you our designs and we can also produce according to your design OEM are accpetable |
Our Advantages:
1. Compliant design and a wide range of insert colors enabling visual contrast compliance
2. Commercial grade stair nosing offering an excellent balance between functionality, aesthetics & price
3. Intended for retro-fit/surface mount installations over concrete, timber & tile substrates
4. Premium quality, abrasive carborundum insert for internal applications which is desighed to resist dirt
entrapment
5. Black, red, green, blue etc. colored inserts available as standard with project colors made to order
6. Easy to clean and maintenance
Installation:
(1) Begin at bottom stair. Carefully lay stair tread upside down on the stair;
(2) Apply a ¼” bead of glue all the way around the perimeter of the bottom side of the tread, keeping approximately ¾” away from the outside edge of tread. Apply an additional ¼” bead in a wavy pattern on the remainder of the bottom side of the tread inside the perimeter bead, as well as a ¼” bead around each predrilled hole approximately ½” from the hole. Note: For exterior installations, substitute clear GE Silicone caulk instead of glue.
(3) Carefully pick up, turn over and place tread on stair;
(4) Push down on tread to distribute glue or caulk;
(5) Be sure ends of tread are equally spaced on stair and that tread is pushed back as far as it will go against front edge;
(6) Using a shop vacuum, hold end of vacuum hose as close as possible to the predrilled hole(s) in the tread in order to vacuum up dust and drillings from hole and tread;
(7) Carefully drill the first hole toward the center of the tread;
(8) Vacuum out all dust and debris from hole;
(9) Screw in and tighten anchor. CAUTION: Using a power driver can strip the fastener. If you use a power driver, use the clutch to help prevent stripping;
(10) Drill and anchor another hole on either end of the tread;
Application:
APPLICATION LIMITATIONS:
a) Do not use in grease or oily conditions
b) Install on straight and solid surface
c) Do not apply a paint finish on top of anti-slip surface
d) Do not install over a floor covering like capte / PVC / Linoleum
| Payment Terms: | TT/LC/DP/DA |
|---|---|
