Home > Products > Electronics & Electricity > Magnetic Materials

JTS150350L square cup type electromagnet is Jiateng technology according to customer requirements, and optimization, to solve the heat fast, residual magnetic field, attracting surface inequality serious problems,
The volume of the square sucker type electromagnet can be customized according to customer's request, and the product of different sizes is different from the use of power and function..
Product principle: when the coil is electrified to produce energy, the shell and the middle of the core magnetization and produces a magnetic field loop, so the sucker product must to work on the suction surface, in mm distance, sucker electromagnet force.
Product styles: general square sucker electromagnet has two styles, ordinary type (i.e. power to pull and release the power) holding type (energized loosen, pull off, and ordinary type just the opposite)
Product size: length of 350mm; wide 150mm; high 35mm.
Working voltage: DC12-220V, can be customized according to customer requirements.
The rate of product power consumption: the frequency of the product use is generally divided into 50%; 100%; 25%; 10% (power time / power + time) * 100%= power rate,
Such as: 100% power, refers to the power of a long time; 50% power, the power of a second, power down 1 second;
Temperature rise: at reasonable use frequency, temperature rise is less than 65
Working environment temperature: -10 for -180
Product voltage: coil and frame AC1200 (50/60HZ) 1 second, (10mA)
Product life: the product under normal use condition, generally all 800000 times above.
Advantages: sucker magnet has the advantages that the utility model mm from the suction and framework and tubular electromagnet concepts different, produced by force is not the same; in spacing, the force decay is not the same, 0-5mm decay by 65% power, 5-10mm according to 85% of the power to attenuation, power generated by the different distance is not the same; in installation is good for installation, can according to customer requirements and design and installation.