Home > Products > Industrial Supplies > Machinery > Welding Machinery

ZM-R590 digital bga rework machine 

1,support PC operation
2,Top and bottom hot air heater, 3rd infrared heater
3,PLC control
4,save 10 groups of temperature parameters
5,alarming in advance

MainFeatures:

1.      Adopt liner slide which makes X、Y、Z axis all can do precision adjustment and fast positioning.

2.      High-precision temperature controller, built-in PC serial port, external sensor, can be controlled by computer. Temperature parameters can be setting and running on the computer.

3.      There are 3 independent heating areas from top to bottom. The 1st and 2nd are hot-air heaters, the 3rdis IR preheating, temperature controlled within ±3 °, Top heater can be adjusted freely, second heater can be adjusted up and down, these heaters can set many groups temperature parameters at the same time; the third IR area can be adjusted the power consumption.

4.      Offer all kinds of hot-air nozzle, it can rotate 360°,With magnet, easy to install and change, customized is available.

5.      Choose imported high-precision K-type thermocouple, closed loop control and automatic temperature compensation system.

6.      Use a V-groove equipped with a flexible fixture for PCB positioning to protect the PCB from deformation when heated or cooled, and it can rework any size of BGA chips.

7.      Powerful cross-flow fan rapidly cool the PCB board to improve efficiency, also built-in vacuum pump and external vacuum suction pen, pick up the chips rapidly.

8.      Before finishing desoldering & soldering, there is a warning, there are emergency stop and automatic power-off protection device when abnormal accident happens, with a double over-heating protection control.

9.      Identified by CE.

10.    Repair Mobile,Laptop,PS3,Xbox etc. and other components on the motherboard, it can meet repair of lead and lead free soldering＆desordering.