|Origin:||Made In China|
|Category:||Consumer Electronics & Lighting / Lighting / LED Lighting|
|Label:||Color changing LED , voice control lamp , USB creative flower|
|Min. Order:||100 pc|
Color changing LED lights voice control lamp USB creative flower lamp to change color
A. Product features
This product is rated capacity as high as 1600 mah.
Long life battery, up to 500 times above recycling.
This product USES 20 (each color 5) super bright LED lamp as light source.It does not hurt the eye, energy saving, environmental protection.
Fingers touch the induction position, can transform lights or LED lights color.
This product with lighting flashlight at the bottom of the lamp holder, making it easy for users to use.
2. Operating instructions
The first to use: 1. Use the touch energy-saving lamps for the first time, in order to play the normal function of the rechargeable battery, please use the USB charging products distribution line round plug
To touch base with energy-saving lamps are connected at one end of the DC power jack, the other end is connected to the normal power supply computer USB port, USB port or USB power adapter,
Charging immediately after eight hours in normal use.
2. To prevent this product in transit triggered by mistake, cause the consumption of the battery.This product factory, the base of the power switch is in "off" position, when use, please turn the power switch in the "on" position.
3. The flashlight use: lighting lamp holder at the bottom of the flashlight USES the toggle switch, please when using a flashlight switch in the "on" position.Please dial back to "off" position after operation.
4. Turn on the light and transform the light color: a finger touch energy-saving light silver induction circle, can light up the lights.If need to control the light color, to touch the induction position again,
LED lights, in turn, transform, until you turn off the lights.
5. Charging: when light brightness dimming, said energy-saving lamps need to charge, and the way of charging, when used for the first time for energy-saving lamp charging about 8 hours can be used again.
(on the other side of the charging indicate the lights lit)
6. Standard accessories: USB charging cable products distribution, DC side diameter of 3.5 mm;The other distribution with a USB power adapter (DC5V input AC110V - 220 v, output, 500 ma)
3. The matters needing attention
When used for the first time, please full charge, when not in use, store must supplement electricity once in three months.
When energy-saving lamp lights dim obviously please charge in time, otherwise it will affect the battery life.
Don't let the product in the rain or be affected with damp be affected with damp.