Product Description
Brand PHILMACHINERY Model DQ2070 Product Alias Phil Grinder
Product use abrasive blade motor power 1.1 (KW) Dimensions 1000X800X1200 (mm)
Weight 300 (kg) category Grinder year service warranty
Attribute values
Third, adjust the machine
1, grinding blades of different angles, you can adjust the angle of the table. When adjusting the angle of the table, you should first fastening bolts loose, then shake the handle to adjust the proper angle, and finally tighten the bolts tightened.
2, the grinding blades of different lengths, the camera body can be adjusted to an appropriate distance from the limit switch, the lock should exceed the length of the blade, which is preferably outside the range 40-50mm.
3, when the instrument toward the blade grinding wheel, you should pay attention to check the blade is in a good seat adjustment, and then adjust the vertical feed grinding, if there is not normal, should be re-adjusted until it is correct.
4. Adjust the vertical feed is by hand wheel wheel bracket to achieve. Handwheel per revolution, equal to feed 2mm, feed should be carried out when the wheel is not touching the blade, otherwise it would not produce grinding straight edge blade defects.
5, in the process of grinding should be noted that the amount of feed, and each time the amount of feed can not be too large to 0.3 ~ 0.5mm is appropriate, if the feed is too large, not only will burn the blade edge, may also cause a host change plates and grinding motor position, the situation appears not running smoothly.
6, when the wheel height to wear 25 ~ 30mm, the need to replace the wheel, before replacing the new wheel, the wheel can be mounted together with the sand, experiments carried out at the static equilibrium, balance before use.
7, when the grinding wheel send out tiny rustle, indicating grinding work normally. If you find a strange noise, should immediately stop, check the feed situation because excessive or inappropriate feed may produce abnormal sound, while tightening the wheel or not checked.
8, grinding, saponification pump should be opened, the coolant is controlled by the size of the nozzle.
Fourth, the electrical control system
1, the machine's electrical equipment is suitable for use in an ambient temperature within the range of 0 ~ 40 ℃, and within 24 hours the average temperature should not exceed 35 ℃, when the machine is in the highest temperature 40 ℃, relative humidity less than 50%, Altitude about 2000 meters.
This machine is a three-phase four-wire power supply, 380V, 50Hz, using neutral N, and requires the user to have to introduce protective conductor PE.
2, the former test preparation
Requirements before turning the power switch, you must carefully check the connection is intact throughout each electrical components are intact, check and correct before allowing power.
3, operating instructions
First on the power switch, this time to test.
Press the left or right button to move the motor starts; press the stop button, move the motor stops.
Press the start button wheel, wheel motor starts, press the stop button on the wheel, the wheel motor stops.
About the trip switch automatically control the movement of motor reversing.
4, if there is work in exceptional circumstances, press the stop button, the machine will stop working.
Our company is the only company producing this straight edge Grinder manufacturers! Currently on the market appears Grinder pictures with my pictures of the same! The reason is because our sales Grinder really good! Popular with the major manufacturers of the pro-Lai! Thank you to our Grinder more push more widely! Also welcome to purchase! Favorable price! !
