Home > Products > Chemicals > Adhesives & Sealants

Colorful Epoxy Resin Illuminated LED Channel Letter 1Colorful Epoxy Resin Illuminated LED Channel Letter 2Colorful Epoxy Resin Illuminated LED Channel Letter 3Colorful Epoxy Resin Illuminated LED Channel Letter 4Colorful Epoxy Resin Illuminated LED Channel Letter 5
  • Colorful Epoxy Resin Illuminated LED Channel Letter 1
  • Colorful Epoxy Resin Illuminated LED Channel Letter 2
  • Colorful Epoxy Resin Illuminated LED Channel Letter 3
  • Colorful Epoxy Resin Illuminated LED Channel Letter 4
  • Colorful Epoxy Resin Illuminated LED Channel Letter 5

Colorful Epoxy Resin Illuminated LED Channel Letter

Model:312AB-6-N
Brand:Jinhua
Origin:-
Category:Chemicals / Adhesives & Sealants
Label:epoxy resin , epoxy adhesive , resin glue
Price: US $9.5 / kg
Min. Order:20 kg
Inquire Now Add to Basket

Member Information

Detail

Shenzhen Jinhua Electronic Materials Co.,Ltd

Free MemberGuang Dong - China
Live Chat:Last Online:15 Jul, 2016

Product Description

Epoxy Resin 312AB-6-N

Feature

  Epoxy resin 312AB-6-N and be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-yellow, high transprancy, no ripple, bright in surface, it can be cured at room temperature or high temperature. 

 

Application

312AB-6-N can be widely used for crystal photo frame, cross-stitch frame, painting frame, craft, ornament decoration, name plate, card, LED strip potting, blade, high quality LED channel letter, etc..

 

Properties before Hardening

Part

312A-6-N

312B-6-N

Color

Transparent

Transparent

Specific gravity

1.15

0.97

Viscosity (25℃)

2000-4000CPS

100 MAXCPS

Mixing ratio

 A: B = 100:33(weight ratio)

Hardening conditions

25 ℃×8H to 10H or 55℃×1.5H (2 g)

Usable  time

25℃×40min (100g)

 

Operation 

1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.

2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.

3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, s est to use the heat curing.

 

Properties after Hardening

Hardness, shore D

<86

Withstand voltage, KV/mm

22

Flexural strength, Kg/mm2

28

Volume resistivity, Ohm3

1x1015

Surface resistance, Ohmm2

5X1015

Thermal conductivity, W/M.K

1.36

Induced electric loss, 1KHZ

0.42

Withstand high temperature, ℃

80

Moisture absorption,  %

<0.15

Compressive strength, Kg/ mm2

8.4

 

Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use. 
2, Avoid eye contact,  in case of contact, wash with plenty of water and get medical attention immediately.

3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake. 
  
Storage And Shelf Life
1, Store at the tempeture of 25°C or cool and dry place.  Avoid from sunlight, high tempeture or hign humidity enviroment. 

2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room tempeture of 25°C degree. 

 

Notice: The above data is typical data measured by the laboratory environment under 

the temperature of 25 ℃, and humidity of 70%. For customers referenconly.

 


Payment Terms:T/T

Product Image

Colorful Epoxy Resin Illuminated LED Channel Letter 1
Img 1
Colorful Epoxy Resin Illuminated LED Channel Letter 2
Img 2
Colorful Epoxy Resin Illuminated LED Channel Letter 3
Img 3
Colorful Epoxy Resin Illuminated LED Channel Letter 4
Img 4
Colorful Epoxy Resin Illuminated LED Channel Letter 5
Img 5

Send Inquiry to this Member

Shenzhen Jinhua Electronic Materials Co.,Ltd

Building B, Yufeng Industrial Park, Jiangshi Road, Gongming Town, Guangming New District,Shenzhen

Phone:
86-0755-27157799
Fax:
86-0755-27128202
Contact:
Kerry (Oversea sales)
Mobile:
13823546652

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Adhesives & Sealants Made In China Products

,  

Adhesives & Sealants China Suppliers and China Manufacturers