Home > Products > Electronics & Electricity > Other Electrical & Electronic

INTRODUCTION

The HDMI Extender over Single Cat5e/6 with Bi-directional IR extends high definition video and audio signals and IR, at a distance of up to 164ft/50m over a single Cat5e/6 cable.  Features EDID management, which allows and encourages source and display “handshake” for seamless integration.  With only one cost effective Cat5e/6 cable, high definition sources with HDMI outputs can be connected to high definition displays with HDMI inputs over long distances.  Deep color video, DTS-HD or Dolby TrueHD audio is supported and compatible with the extender.  In addition, the extenderis also equipped with bi-directional IR pass-through which allows for source or display control.

The extenderincludes two units: transmitting unit  and receiving unit.  The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable.  The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals.  The extenderoffers the most convenient solution for HDMI extension over a single Cat5e/6 with long distance capability, and is the perfect solution for any application.

FEATURES

• Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable
• Bi-directional IR system allowing for control of source or display (IR accessories included)
• 2D/3D  EDID management
• Transmission Range: Extends 1080p resolution up to 164ft/50m over a single Cat5e or Cat6 cable
• Works with HDMI and HDCP compliant devices
• Supports up to 1080p High Definition resolution
• Compact design for an easy and flexible installation

SPECIFICATIONS

Video Bandwidth:  Single-link 165Mhz [ 4.95Gbps]

Video Support:  480i/480p/720p/1080i/1080p @60

Audio Support:  Surround Sound (up to 7.1 ch) or stereo digital audio

Transmission Range:  HD [1080p 24-bit color] – up to 50m [164ft]

Input TMDS Signal:  3.3 volts

Input DDC Signal:  5.0 volts/P-P

ESD Protection:  Human Body model:             +/- 8 kV (air-gap discharge)

+/- 4 kV (contact discharge)

PCB stack-up:  4 layouts

HDMI connector:  Type A 19 pin female

RJ-45 connector:  WE/SS 8P8C 

3.5mm connector:  (TX and RX) IR Receiver/IR Blaster

MECHANICAL SPECS

Housing:  Metal enclosure

Power Supply:  (2) 5V1A DC

Power consumption:  2.5 watts (TX); 1.2 watts (RX)

Operation temperature:  32~104 °F

Storage temperature:  -4 ~140 °F

Relative humidity:  20~90 % RH (no condensation)

Package Contents: 

1. HDMI Transmitter          1pcs
2. HDMI Receiver                1pcs
3. Windband IR Tx cable    1pcs
4. windband IR Rx cable     1pcs
5. 5V1A DC Power Supply Adaptor  2 Pcs
6. Product Manual         1pcs