Home > Products > Packaging , Printing & Paper > Printing Materials

Specifications

Screen printing squeegees
- Solvent resistance
- Good re-sharpening
- Perfect elasticity
- Excel

 

Screen printing squeegees
- Solvent resistance
- Good re-sharpening
- Perfect elasticity
- Excellent edge
- Low swelling
- Abrasion resistance
- Different solvent resistance
- Long service life

Squeegees Series:
W Series
For water-base ink in textile printing
S Series
For common solvent inks in general graphic printing
V Series
For various high-grade inks in elegant printing

UV Series

It is widely used with UV ink, including CD and multi-color printing.  

AA Series

For high requirement printing with good solvent resistance, abrasion resistance.

Rigidity:

Size selection:
( Length: Width: Thickness)
2540mm100: 1mm-300mm: 1mm-20mm
3660mm144: 1mm-300mm: 1mm-20mm
4000mm157: 1mm-300mm: 1mm-20mm
3300mm: 1mm-300mm: 1mm-20mm
Widely used in printing on testiles, glass, AD, packing, hectograph, chinaware, labels for wine and cigarettes, plates, PVC, CD, PS, scutcheon, electronic appliances, keyboards, filmswitch, circuit board, ABS etc.

Shape:

 G1 Square edge 90 deg blade is used for a wide range of graphic and textile printing applications where a high ink deposit is required. Suitable for manual and automatic printing

.

G2 G3 Single bevelled squeegees used for printing into non-absorbent surfaces such as plastic, glass or metal. Conforms easily to irregular surfaces while maintaining excellent ink deposit. Widely used on container printing and also good on bottle printing.

G4 G5 This double bevel edge blade (60 & 45 deg) provides excellent control for direct printing onto cylindrical surfaces and irregular forms, also fine print for textiles.

 G6 G7 This double bevel flat edge blade is used on most substrates including direct ceramic printing. The profile allows for maximum ink shear and good angle control when depositing ink with a wide range of viscosity on multiple substrates.

G8 G9 The single bevel flat edge blade, allows for increase squeegee angle while maintaining the sharp edge for maximum ink shear on cylindrical substrates. Works well with high viscosity ink.

G10 It is specially designed for the requirement of container printing and its advantage is to offer two printing blades while reducing the breakdown time during the production.
 

G11 Blade will flex less preventing roll over, the angle is therefore maintained giving excellent ink shear. The softer edge allowing for good ink deposit.

 G12 Square edge Composite Triple hardness blade gives the printer the responsiveness of a soft to medium hard blade without the undesired flexing created by increased secondary force squeegee pressure. Excellent for printing on high mesh counts (120/140 threads/cm) with high tension.